Caudal libre de nariz al lado anti-retorno válvula

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.

• Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
• Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
• Will accept 5000 psi (350 bar) at ports 1 and 2.
• Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
• Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP or /LH (see CONFIGURATION section). For further details, please see the Materials of Construction page.
• Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

• A2A Ninety degree with reverse flow check, accepts standard and weatherized coils
• A2B Ninety degree with reverse flow check, accepts standard and weatherized coils
• A2C Ninety degree with reverse flow check, accepts standard and weatherized coils
• A2I Ninety degree with reverse flow check, accepts standard and weatherized coils
• A2J Ninety degree with reverse flow check, accepts standard and weatherized coils
• A2K Ninety degree with reverse flow check, accepts standard and weatherized coils
• A2T Ninety degree with reverse flow check, accepts standard and weatherized coils
• A2U Ninety degree with reverse flow check, accepts standard and weatherized coils
• A2V Ninety degree with reverse flow check, accepts standard and weatherized coils
• E6A Ninety degree with reverse flow check - sequence
• E6B Ninety degree with reverse flow check - sequence
• E6C Ninety degree with reverse flow check - sequence
• E6I Ninety degree with reverse flow check - sequence
• E6J Ninety degree with reverse flow check - sequence
• E6K Ninety degree with reverse flow check - sequence
• E6T Ninety degree with reverse flow check - sequence
• E6U Ninety degree with reverse flow check - sequence
• E6V Ninety degree with reverse flow check - sequence
• E7A Through port 1 with reverse flow check
• E7B Through port 1 with reverse flow check
• E7C Through port 1 with reverse flow check
• E7I Through port 1 with reverse flow check
• E7J Through port 1 with reverse flow check
• E7K Through port 1 with reverse flow check
• E7T Through port 1 with reverse flow check
• E7U Through port 1 with reverse flow check
• E7V Through port 1 with reverse flow check
• E8A 2 cylinder sequence, with reverse checks
• E8B 2 cylinder sequence, with reverse checks
• E8C 2 cylinder sequence, with reverse checks
• E8I 2 cylinder sequence, with reverse checks
• E8J 2 cylinder sequence, with reverse checks
• E8K 2 cylinder sequence, with reverse checks
• E8T 2 cylinder sequence, with reverse checks
• E8U 2 cylinder sequence, with reverse checks
• E8V 2 cylinder sequence, with reverse checks
• EB2 ISO 03: Reducer on A with reverse flow check
• EB3 ISO 03: Reducer on B with reverse flow check
• EB9 ISO 03: Reducer on A and B with reverse flow check
• EPB Cushion lock with make up checks
• EPC Cushion lock with make up checks
• EPJ Cushion lock with make up checks
• EPK Cushion lock with make up checks
• EPU Cushion lock with make up checks
• EPV Cushion lock with make up checks
• EQB Cushion lock with make up checks and shuttle
• EQC Cushion lock with make up checks and shuttle
• EQJ Cushion lock with make up checks and shuttle
• EQK Cushion lock with make up checks and shuttle
• EQU Cushion lock with make up checks and shuttle
• EQV Cushion lock with make up checks and shuttle
• FHA Cross port with make up checks
• FHB Cross port with make up checks
• FHC Cross port with make up checks
• FHD Cross port with make up checks
• FHE Cross port with make up checks
• FHF Cross port with make up checks
• FHG Cross port with make up checks
• FHH Cross port with make up checks
• FHI Cross port with make up checks
• FMA Cross port with make up checks
• FMB Cross port with make up checks
• FMC Cross port with make up checks
• FMI Cross port with make up checks
• FMJ Cross port with make up checks
• FMK Cross port with make up checks
• FMT Cross port with make up checks
• FMU Cross port with make up checks
• FMV Cross port with make up checks
• FNA Ninety degree with reverse flow check
• FNB Ninety degree with reverse flow check
• FNC Ninety degree with reverse flow check
• FNI Ninety degree with reverse flow check
• FNJ Ninety degree with reverse flow check
• FNK Ninety degree with reverse flow check
• FNT Ninety degree with reverse flow check
• FNU Ninety degree with reverse flow check
• FNV Ninety degree with reverse flow check
• GNL Ninety degree with reverse flow check
• GNM Ninety degree with reverse flow check
• GNN Ninety degree with reverse flow check
• GNP Ninety degree with reverse flow check
• GNQ Ninety degree with reverse flow check
• GNR Ninety degree with reverse flow check
• MB2 ISO 03: Reducer/reliever on A with reverse flow check and port 4 external
• MB3 ISO 03: Reducer/reliever on B with reverse flow check and port 4 external
• U3T ISO 03: On B with free flow check
• U4F ISO 03: Reducer on A with reverse flow check
• U7U ISO 03: amortiguar y bloquear
• U8R ISO 03: Reducer on A with reverse flow check
• U9T Ninety degree with reverse flow check, accepts standard and weatherized coils
• U9U Ninety degree with reverse flow check, accepts standard and weatherized coils
• U9V Ninety degree with reverse flow check, accepts standard and weatherized coils
• U9W Ninety degree with reverse flow check, accepts standard and weatherized coils
• U9X Ninety degree with reverse flow check, accepts standard and weatherized coils
• U9Y Ninety degree with reverse flow check, accepts standard and weatherized coils
• VVU Direct mount, cross port with make up checks
• WJW P to T, check on P, bottom ports
• WJX P to T, check on P, bottom ports
• WJY P to T, check on P, bottom ports
• WJZ P to T, check on P, side ports
• WKB P to T, check on P, side ports
• WKC P to T, check on P, side ports
• X5G Ninety degree with reverse flow check
• X5H Ninety degree with reverse flow check
• X5J Ninety degree with reverse flow check
• X5K Ninety degree with reverse flow check
• X5L Ninety degree with reverse flow check
• X5M Ninety degree with reverse flow check
• X5N Ninety degree with reverse flow check
• X5P Ninety degree with reverse flow check
• X5Q Ninety degree with reverse flow check
• X9S Volvo F12-60: Cushion lock with make up checks
• Z3N ISO 03: Priority flow control on A with reverse flow check
• Z3O ISO 03: Priority flow control on B with reverse flow check

• Nuevas válvulas direccionales accionadas por solenoide de la serie FLeX
• Check Valves, Flow Control and Priority Flow Control Valves Technical Tips
• QuickDesign con SmartConnect Ofrece una Herramienta para Construir Esquemáticos
• Sun Offers Zinc-Nickel Plating for Corrosion Resistance
• Sun Expands Corrosion-Resistant Solutions
• Sun Cartridges with EPDM Seals
• Válvulas y bobinas a solenoides de la serie Sun FLeX
• Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
• Válvulas CavitySaver de multifunción ofrecen varias soluciones en una
• Pilot Controlled Directional Cartridges Technical Tips

• Manufacturing Sun Cartridge Cavities (522.27 KB)
• Check, Flow Control, and Priority Flow Control Valves (537.44 KB)

• Cavity Information (S-171) and Tooling
• Fluid Recommendations: Oil Viscosity, Cleanliness & Temperature
• Sun's Floating Style Screw-In Cartridge (1.06 MB)
• Units of Measure, Settings, and Conversions
• Sun Model Code Explanation; 999-901-334 (343.9 KB)
• Performance Data
• Cartridges: Materials of Construction