Serie 1 - cavidad T-10A y cavidad T-13A, Poliuretano cartucho juego de sellos

Sun offers replacement seal kits for all cartridge models. These kits include all of the external seals on the cartridge along with installation instructions. Seal kits are available in Buna-N and Viton for all models, along with EPDM and polyurethane for many models. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.

• The shelf life for this cartridge seal kit is ten years from date of purchase. This date will be printed on the kit packaging.
• Polyurethane seals have a higher tensile strength, are more abrasion/extrusion resistant, and are well suited for high cycle and high pressure applications.
• The Series 1, two port cavity comes in two versions: the T-10A and the T-13A. The T-10A cavity is typically used in relief applications which require larger port areas, hence a deeper cavity. The T-13A cavity is typically used in flow control applications and utilizes a smaller port area. Since both cavities are Series 1, two port, they share common seal kits, but exclude the possibility of cartridge interchangeability between the two functions.

What models can this kit be used with?

• CDAA Espalda-con-espalda anti-retorno/selector válvula con señal externa
• CDAC Espalda-con-espalda anti-retorno/selector válvula con señal al puerto 2
• CNCC Fixed-orifice, no compensado por presión , control de caudal válvula con anti-retorno de caudal inverso
• CNDC Caudal libre de nariz al lado anti-retorno válvula con orificio de desvió
• CSAA Solo una esfera selector válvula con señal externa
• CSAC Solo una esfera selector válvula con señal al puerto 2
• CXCD Caudal libre del lado a la nariz anti-retorno válvula
• CXDA Caudal libre de nariz al lado anti-retorno válvula
• FCCB Fixed-orifice compensado por presión control de caudal válvula con anti-retorno de caudal inverso
• FDBA Totalmente ajustable compensado por presión control de caudal válvula con anti-retorno de caudal inverso
• FLDA Filtro
• FQCA Fixed-orifice, fusible de caudal válvula
• FXCA Fixed-orifice, compensado por presión control de caudal válvula
• NCCB Totalmente ajustable aguja válvula con anti-retorno de caudal inverso
• NCCC Totalmente ajustable aguja válvula con anti-retorno de caudal inverso
• NCCD Totalmente ajustable aguja válvula con anti-retorno de caudal inverso
• NFCC Totalmente ajustable aguja válvula
• NFCD Totalmente ajustable aguja válvula
• RBAC Acción-directa alivio válvula - capacidad de pilotaje
• RPEC Pilot-operated, pistón balanceado alivio válvula
• RPEC8 Pilot-operated, pistón balanceado alivio módulo principal con cavidad de control T-8A integral
• RPEE Acción-rápida , pilot-operated, pistón balanceado alivio válvula
• RQEB Tirar-abajo, pilot-operated, pistón balanceado alivio válvula
• RVCK FLeX Series 2-stage, solenoid-operated ajustable alivio válvula , normally vented
• RVCL FLeX Series 2-stage, solenoid-operated ajustable alivio válvula , energize to vent
• RVCM FLeX Series 2-stage, solenoid-operated ajustable alivio válvula , energize to block
• RVCN FLeX Series 2-stage, solenoid-operated ajustable alivio válvula , normally blocked
• SXCB De referencia atmosférica , acción-directa secuencia válvula sin anti-retorno de caudal inverso
• XFAA Cavidad T-10A a cavidad T-8A convertidor
• XFAB Cavidad T-10A a cavidad T-8A convertidor con malla de filtro
• XFCA Todos los puertos bloqueados tapón de cavidad
• XFCAE Puerto 1 al puerto externo, port 2 bloqueado tapón de cavidad
• XFOA Todos los puertos abiertos tapón de cavidad
• XGAA Cavidad T-13A a cavidad T-8A convertidor
• XGCA Todos los puertos bloqueados tapón de cavidad
• XGCAE Puerto 1 al puerto externo, port 2 bloqueado tapón de cavidad

• Install back-up rings and O-rings as shown in views.
• See installation variations for models associated with alternative installation views.
• When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
• When installing cartridge - be sure to torque to recommended value.

• Seal Kit Installation Guidelines
• Sun's Floating Style Screw-In Cartridge (1.06 MB)
• Seals: Materials of Construction