Serie 1 - cavidad T-10A y cavidad T-13A, buna-N, cartucho juego de sellos
Technical Features [ + ]
Sun offers replacement seal kits for all cartridge models. These kits include all of the external seals on the cartridge along with installation instructions. Seal kits are available in Buna-N and Viton for all models, along with EPDM and polyurethane for many models. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
- The shelf life for this cartridge seal kit is ten years from date of purchase. This date will be printed on the kit packaging.
- The Series 1, two port cavity comes in two versions: the T-10A and the T-13A. The T-10A cavity is typically used in relief applications which require larger port areas, hence a deeper cavity. The T-13A cavity is typically used in flow control applications and utilizes a smaller port area. Since both cavities are Series 1, two port, they share common seal kits, but exclude the possibility of cartridge interchangeability between the two functions.
Cartridge Installation Data [ + ]
Series | 1 |
Cartridge Thread | M20M20 |
Valve Hex Size | 7/8 in.22,2 mm |
Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
cavidad | T-10A |
Cartridge Seal Installation Variations [ + ]
Cartridge Assignments | Models: CDAA, CNCC, CSAA, CXCD, FCCB, FDBA, FQCA, FXCA, NCCB, NCCC, NCCD, RBAC, RBAT, RPEC, RPEE, RQEB, SCCB, SXCB, XFCA, XGAA, XGCA, Views: A,BModels: CDAA, CNCC, CSAA, CXCD, FCCB, FDBA, FQCA, FXCA, NCCB, NCCC, NCCD, RBAC, RBAT, RPEC, RPEE, RQEB, SCCB, SXCB, XFCA, XGAA, XGCA, Views: A,B |
Cartridge Assignments | Models: CDAC, CXDF, CNDB, CSAC, CNDC, CXDA, CXDB, FLDA, CXCB, XFAA, XFAB, Views: A,DModels: CDAC, CXDF, CNDB, CSAC, CNDC, CXDA, CXDB, FLDA, CXCB, XFAA, XFAB, Views: A,D |
Cartridge Assignments | Models: NFCC, NFCD, DLDB, Views: A,CModels: NFCC, NFCD, DLDB, Views: A,C |
Used With [ + ]
What models can this kit be used with?
- CDAA Espalda-con-espalda anti-retorno/selector válvula con señal externa
- CDAC Espalda-con-espalda anti-retorno/selector válvula con señal al puerto 2
- CNCC Fixed-orifice, no compensado por presión , control de caudal válvula con anti-retorno de caudal inverso
- CNDC Caudal libre de nariz al lado anti-retorno válvula con orificio de desvió
- CSAA Solo una esfera selector válvula con señal externa
- CSAC Solo una esfera selector válvula con señal al puerto 2
- CXCD Caudal libre del lado a la nariz anti-retorno válvula
- CXDA Caudal libre de nariz al lado anti-retorno válvula
- FCCB Fixed-orifice compensado por presión control de caudal válvula con anti-retorno de caudal inverso
- FDBA Totalmente ajustable compensado por presión control de caudal válvula con anti-retorno de caudal inverso
- FLDA Filtro
- FQCA Fixed-orifice, fusible de caudal válvula
- FXCA Fixed-orifice, compensado por presión control de caudal válvula
- NCCB Totalmente ajustable aguja válvula con anti-retorno de caudal inverso
- NCCC Totalmente ajustable aguja válvula con anti-retorno de caudal inverso
- NCCD Totalmente ajustable aguja válvula con anti-retorno de caudal inverso
- NFCC Totalmente ajustable aguja válvula
- NFCD Totalmente ajustable aguja válvula
- RBAC Acción-directa alivio válvula - capacidad de pilotaje
- RPEC Pilot-operated, pistón balanceado alivio válvula
- RPEC8 Pilot-operated, pistón balanceado alivio módulo principal con cavidad de control T-8A integral
- RPEE Acción-rápida , pilot-operated, pistón balanceado alivio válvula
- RQEB Tirar-abajo, pilot-operated, pistón balanceado alivio válvula
- RVCK FLeX Series 2-stage, solenoid-operated ajustable alivio válvula , normally vented
- RVCL FLeX Series 2-stage, solenoid-operated ajustable alivio válvula , energize to vent
- RVCM FLeX Series 2-stage, solenoid-operated ajustable alivio válvula , energize to block
- RVCN FLeX Series 2-stage, solenoid-operated ajustable alivio válvula , normally blocked
- SXCB De referencia atmosférica , acción-directa secuencia válvula sin anti-retorno de caudal inverso
- XFAA Cavidad T-10A a cavidad T-8A convertidor
- XFAB Cavidad T-10A a cavidad T-8A convertidor con malla de filtro
- XFCA Todos los puertos bloqueados tapón de cavidad
- XFCAE Puerto 1 al puerto externo, port 2 bloqueado tapón de cavidad
- XFOA Todos los puertos abiertos tapón de cavidad
- XGAA Cavidad T-13A a cavidad T-8A convertidor
- XGCA Todos los puertos bloqueados tapón de cavidad
- XGCAE Puerto 1 al puerto externo, port 2 bloqueado tapón de cavidad
Notes [ + ]
- Install back-up rings and O-rings as shown in views.
- See installation variations for models associated with alternative installation views.
- When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
- When installing cartridge - be sure to torque to recommended value.
Additional Resources [ + ]
Technical Information