Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Serie 1 - cavidad T-10A y cavidad T-13A, EPDM, cartucho juego de sellos

Expand All

Technical Features [ + ]

Sun offers replacement seal kits for all cartridge models. These kits include all of the external seals on the cartridge along with installation instructions. Seal kits are available in Buna-N and Viton for all models, along with EPDM and polyurethane for many models. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.

EPDM seals have no limited shelf life.
EPDM seals are purple in color for easy stock and field identification.
The Series 1, two port cavity comes in two versions: the T-10A and the T-13A. The T-10A cavity is typically used in relief applications which require larger port areas, hence a deeper cavity. The T-13A cavity is typically used in flow control applications and utilizes a smaller port area. Since both cavities are Series 1, two port, they share common seal kits, but exclude the possibility of cartridge interchangeability between the two functions.

Technical Data [ + ]

Series	1
Cartridge Thread	M20M20
Valve Hex Size	7/8 in.22,2 mm
Valve Installation Torque	30 - 35 lbf ft41 - 47 Nm
cavidad	T-10A

Cartridge Seal Installation Variations [ + ]

Cartridge Assignments	Models: CXCD, FDBA, FXCA, RBAC, RPEC, XGCA, Views: A,BModels: CXCD, FDBA, FXCA, RBAC, RPEC, XGCA, Views: A,B
Cartridge Assignments	Models: CXDA, Views: A,DModels: CXDA, Views: A,D
Cartridge Assignments	Models: NFCC, NFCD, Views: A,CModels: NFCC, NFCD, Views: A,C

Used With [ + ]

What models can this kit be used with?

CXCD Caudal libre del lado a la nariz anti-retorno válvula
CXDA Caudal libre de nariz al lado anti-retorno válvula
FDBA Totalmente ajustable compensado por presión control de caudal válvula con anti-retorno de caudal inverso
FLDA Filtro
FPCC Electro-proporcional control de caudal válvula - normalmente cerrado
FXCA Fixed-orifice, compensado por presión control de caudal válvula
NCCB Totalmente ajustable aguja válvula con anti-retorno de caudal inverso
NFCC Totalmente ajustable aguja válvula
NFCD Totalmente ajustable aguja válvula
RBAC Acción-directa alivio válvula - capacidad de pilotaje
RPEC Pilot-operated, pistón balanceado alivio válvula
RPEC8 Pilot-operated, pistón balanceado alivio módulo principal con cavidad de control T-8A integral
SXCB De referencia atmosférica , acción-directa secuencia válvula sin anti-retorno de caudal inverso
XFAA Cavidad T-10A a cavidad T-8A convertidor
XFAB Cavidad T-10A a cavidad T-8A convertidor con malla de filtro
XGCA Todos los puertos bloqueados tapón de cavidad
XGCAE Puerto 1 al puerto externo, port 2 bloqueado tapón de cavidad

Notes [ + ]

Install back-up rings and O-rings as shown in views.
See installation variations for models associated with alternative installation views.
When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
When installing cartridge - be sure to torque to recommended value.
Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.

Additional Resources [ + ]

Technical Information

990010014 | Accesorios » Juego de Sellos para Cartuchos | Sun Hydraulics

Assembly Build Process

Assembly Build Process

Serie 1 - cavidad T-10A y cavidad T-13A, EPDM, cartucho juego de sellos

Footer