Model: CXFAXAN
鼻尖到鼻侧自由流 单向阀
流量: 40 gpm160 L/min. |
插孔: T-5A
技术特性 [ + ]
自由流，鼻端孔到侧孔单向阀为开/关液路元件，它允许液流从进口（口1）向出口（口2）自由流动，截止其反向液流。
- 两口单向阀都是采用相同的孔型，不过需要注意流动的方向有可能相反
- 单向阀具备非常低的泄漏等级，其中最大泄漏量每分钟少于1滴（0.07cc/min。）
- 1口和2口均可承受5000psi（350bar）的压力。
- 配置EPDM密封圈的插装阀用于磷酸酯液压油系统。暴露在石油基液压油或润滑油脂中会损坏密封圈。
- 抗腐蚀阀是针对腐蚀环境下使用的，其型号通过后缀“/AP”区分（查阅如下可选项）。外部零件是由不锈钢，同时可能的情况下带有钛或者黄铜，内部的零件由碳钢制作，就如同标准阀。如需要知道更详细的信息，请查看结构材料页面。
- Sun浮动式的结构可以最大限度地减少由于过大的安装扭矩以及孔型加工的误差所造成的干涉现象
技术数据 [ + ]
注意：技术参数可能因产品配置而不同。请查看产品配置部分。
| 插孔 | T-5A |
| 系列 | 2 |
| 通流能力 | 40 gpm160 L/min. |
| 最大操作压力 | 5000 psi350 bar |
| 110 SUS (24 cSt)下的最大泄漏 | 1 drops/min.0,07 cc/min. |
| 阀头部安装六角尺寸 | 1 1/8 in.28,6 mm |
| 阀安装扭矩 | 45 - 50 lbf ft61 - 68 Nm |
| 型号重量 | .40 lb0,20 kg |
| Seal kit - Cartridge | Buna: 990203007 |
| Seal kit - Cartridge | EPDM: 990203014 |
| Seal kit - Cartridge | Viton: 990203006 |
性能曲线 [ + ]
常见问题 [ + ]
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Direct acting valves are used to prevent over pressure and pilot operated valves are used to regulate pressure. If you are unsure, use a direct acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.
Because of the very high ratio, the COFO has limited capacity. The discharge path is across a .050 inch (1,3 mm) diameter orifice. If you have large accumulators combined with low precharge pressures, this may not discharge the energy quickly enough. Using the COFO XDN cartridge in conjunction with an LODA XDN will provide capacity for larger applications.
Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
Related Accessories [ + ]
- 3BC 平衡缓冲/液压锁附梭阀
- 3BD 平衡缓冲/液压锁附梭阀
- 3BK 平衡缓冲/液压锁附梭阀
- 3BL 平衡缓冲/液压锁附梭阀
- 3BV 平衡缓冲/液压锁附梭阀
- 3BW 平衡缓冲/液压锁附梭阀
- 4BC 平衡缓冲/液压锁附吸油
- 4BD 平衡缓冲/液压锁附吸油
- 4BK 平衡缓冲/液压锁附吸油
- 4BL 平衡缓冲/液压锁附吸油
- 4BV 平衡缓冲/液压锁附吸油
- 4BW 平衡缓冲/液压锁附吸油
- 5BC 平衡缓冲/液压锁附吸油
- 5BD 平衡缓冲/液压锁附吸油
- 5BK 平衡缓冲/液压锁附吸油
- 5BL 平衡缓冲/液压锁附吸油
- 5BV 平衡缓冲/液压锁附吸油
- 5BW 平衡缓冲/液压锁附吸油
- B6A 顺序阀.口1附止回阀及测压口
- B6B 顺序阀.口1附止回阀及测压口
- B6C 顺序阀.口1附止回阀及测压口
- B6D 顺序阀.口1附止回阀及测压口
- B6I 顺序阀.口1附止回阀及测压口
- B6J 顺序阀.口1附止回阀及测压口
- B6K 顺序阀.口1附止回阀及测压口
- B6U 顺序阀.口1附止回阀及测压口
- B6V 顺序阀.口1附止回阀及测压口
- B6W 顺序阀.口1附止回阀及测压口
- B7B 口1接两油口,附止回阀及测压口
- B7C 口1接两油口,附止回阀及测压口
- B7D 口1接两油口,附止回阀及测压口
- B7J 口1接两油口,附止回阀及测压口
- B7K 口1接两油口,附止回阀及测压口
- B7L 口1接两油口,附止回阀及测压口
- B7U 口1接两油口,附止回阀及测压口
- B7V 口1接两油口,附止回阀及测压口
- B7W 口1接两油口,附止回阀及测压口
- B8B 2油缸顺序阀附止回阀
- B8C 2油缸顺序阀附止回阀
- B8D 2油缸顺序阀附止回阀
- B8J 2油缸顺序阀附止回阀
- B8K 2油缸顺序阀附止回阀
- B8U 2油缸顺序阀附止回阀
- B8V 2油缸顺序阀附止回阀
- B8W 2油缸顺序阀附止回阀
- BB2 ISO 05: Reducer on A with reverse flow check
- BB3 ISO 05: Reducer on B with reverse flow check
- BB9 ISO 05: Reducer on A and B with reverse flow check
- BJ2 ISO 05 - X&Y: Reducer on A with reverse flow check
- BJ3 ISO 05 - X&Y: Reducer on B with reverse flow check
- BJ9 ISO 05 - X&Y: Reducer on A and B with reverse flow check
- BPC 平衡缓冲/液压锁附吸油
- BPD 平衡缓冲/液压锁附吸油
- BPK 平衡缓冲/液压锁附吸油
- BPL 平衡缓冲/液压锁附吸油
- BPV 平衡缓冲/液压锁附吸油
- BPW 平衡缓冲/液压锁附吸油
- BQC 平衡缓冲/液压锁附吸油
- BQD 平衡缓冲/液压锁附吸油
- BQK 平衡缓冲/液压锁附吸油
- BQL 平衡缓冲/液压锁附吸油
- BQV 平衡缓冲/液压锁附吸油
- BQW 平衡缓冲/液压锁附吸油
- CB2 ISO 05: AT泄压, BT附止回
- CB4 ISO 05: On A with reverse flow check
- CB5 ISO 05: 位于B通路上附止回
- CJ2 ISO 05 - X&Y: AT泄压, BT附止回
- CJ4 ISO 05 - X&Y: On A with reverse flow check
- CJ5 ISO 05 - X&Y: 位于B通路上附止回
- CK3 ISO 07: BT泄压, AT附止回阀
- CKJ ISO 07: AT泄压, BT附止回
- CMB 平衡缓冲/液压锁附吸油
- CMC 平衡缓冲/液压锁附吸油
- CMD 平衡缓冲/液压锁附吸油
- CMJ 平衡缓冲/液压锁附吸油
- CMK 平衡缓冲/液压锁附吸油
- CML 平衡缓冲/液压锁附吸油
- CMU 平衡缓冲/液压锁附吸油
- CMV 平衡缓冲/液压锁附吸油
- CMW 平衡缓冲/液压锁附吸油
- CNB 进出油口垂直排列,附止回阀
- CNC 进出油口垂直排列,附止回阀
- CND 进出油口垂直排列,附止回阀
- CNI 进出油口垂直排列,附止回阀
- CNJ 进出油口垂直排列,附止回阀
- CNK 进出油口垂直排列,附止回阀
- CNU 进出油口垂直排列,附止回阀
- CNV 进出油口垂直排列,附止回阀
- CNW 进出油口垂直排列,附止回阀
- DNB 进出油口垂直排列,附止回阀
- DNC 进出油口垂直排列,附止回阀
- DND 进出油口垂直排列,附止回阀
- DNJ 进出油口垂直排列,附止回阀
- DNK 进出油口垂直排列,附止回阀
- DNL 进出油口垂直排列,附止回阀
- DNU 进出油口垂直排列,附止回阀
- DNV 进出油口垂直排列,附止回阀
- DNW 进出油口垂直排列,附止回阀
- NB2 ISO 05: Reducer/reliever on A with reverse flow check and port 4 external
- NB3 ISO 05: Reducer/reliever on B with reverse flow check and port 4 external
- NJ2 ISO 05 - X&Y: Reducer/reliever on A with reverse flow check and port 4 external
- NJ3 ISO 05 - X&Y: Reducer/reliever on B with reverse flow check and port 4 external
- U7P ISO 03: On B with free flow check
- U8B ISO 05 - X&Y: On A with reverse flow check
- WAT P to T, check on P, side ports
- WAU P to T, check on P, side ports
- WAV P to T, check on P, side ports
- WAW P to T, check on P, side ports
- WAX P to T, check on P, side ports
- WAY P to T, check on P, side ports
- WHY ISO 05 - X&Y: A口优先流量控制附止回
- WHZ ISO 05 - X&Y: B口优先流量控制附止回
- X9K Danfoss OMS: 平衡缓冲/液压锁附吸油
- X9N Danfoss OMS: 平衡缓冲/液压锁附吸油
- X9P Danfoss OMS: 平衡缓冲/液压锁附吸油
- X9R Danfoss OMS: 平衡缓冲/液压锁附吸油
- X9Y ISO 05 - X&Y: Reducer on B with reverse flow check
- Z3P ISO 05: A口优先流量控制附止回
- Z3Q ISO 05: B口优先流量控制附止回
- Z3T 减压阀.口2附止回阀.口1附测压口
- Z3V 减压阀.口2附止回阀.口1附测压口
- Z5D ISO 05 - X&Y: AT泄压, BT附止回
- Z6U ISO 07: AT泄压, BT附止回
额外来源 [ + ]
集锦
- Sun推出抗腐蚀产品解决方案
- T: 让您的系统更加灵活，让您的未来更加可期！
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Pilot Controlled Directional Cartridges Technical Tips
- Sun Cartridges with EPDM Seals
- Check Valves, Flow Control and Priority Flow Control Valves Technical Tips
- Sun FLeX™系列电磁阀&线圈
- 插孔节省™复合功能阀 简化你的液压方案
- Another Optimized Solution from Sun Hydraulics!
- Sun’s Cartridge Symbol Library
- Sun Introduces Additional Solenoid-Operated Pilot Valves
技术指导
- Sun插装阀插孔 (551.8 KB)
- 单向阀 节流阀 优先节流阀 (553.02 KB)
- 回路简化阀 (623.23 KB)
- 先导控制换向阀 (754.75 KB)
- Check, Flow Control, and Priority Flow Control Valves (537.44 KB)
技术信息