Model: CXCDXCN
鼻侧到鼻尖自由流 单向阀
流量: 15 gpm60 L/min. |
插孔: T-13A
Symbols for CXCD
技术特性 [ + ]
自由流，侧孔到鼻端孔单向阀为开/关液路元件，它允许液流从进口（口2）向出口（口1）自由流动，截止其反向液流。
- 两口单向阀都是采用相同的孔型，不过需要注意流动的方向有可能相反
- 在已有阀块孔加工错误的回路中，这些阀可考虑使用为回路简化阀。旁路到鼻尖（2口到1口）的2口单向阀流量等级比鼻尖到旁路（1口到2口）的2口单向阀少30%。后者为优先推荐型号。
- 单向阀具备非常低的泄漏等级，其中最大泄漏量每分钟少于1滴（0.07cc/min。）
- 1口和2口均可承受5000psi（350bar）的压力。
- Sun浮动式的结构可以最大限度地减少由于过大的安装扭矩以及孔型加工的误差所造成的干涉现象
技术数据 [ + ]
注意：技术参数可能因产品配置而不同。请查看产品配置部分。
| 插孔 | T-13A |
| 系列 | 1 |
| 通流能力 | 15 gpm60 L/min. |
| 最大操作压力 | 5000 psi350 bar |
| 110 SUS (24 cSt)下的最大泄漏 | 1 drops/min.0,07 cc/min. |
| 阀头部安装六角尺寸 | 7/8 in.22,2 mm |
| 阀安装扭矩 | 30 - 35 lbf ft41 - 47 Nm |
| 型号重量 | .20 lb0,10 kg |
| Seal kit - Cartridge | Buna: 990010007 |
| Seal kit - Cartridge | EPDM: 990010014 |
| Seal kit - Cartridge | Polyurethane: 990010002 |
| Seal kit - Cartridge | Viton: 990010006 |
性能曲线 [ + ]
常见问题 [ + ]
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Direct acting valves are used to prevent over pressure and pilot operated valves are used to regulate pressure. If you are unsure, use a direct acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.
Because of the very high ratio, the COFO has limited capacity. The discharge path is across a .050 inch (1,3 mm) diameter orifice. If you have large accumulators combined with low precharge pressures, this may not discharge the energy quickly enough. Using the COFO XDN cartridge in conjunction with an LODA XDN will provide capacity for larger applications.
Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
Related Accessories [ + ]
- A7A Ninety degree with reverse flow check, accepts standard and weatherized coils
- A7B Ninety degree with reverse flow check, accepts standard and weatherized coils
- A7C Ninety degree with reverse flow check, accepts standard and weatherized coils
- A7I Ninety degree with reverse flow check, accepts standard and weatherized coils
- A7J Ninety degree with reverse flow check, accepts standard and weatherized coils
- A7K Ninety degree with reverse flow check, accepts standard and weatherized coils
- A7T Ninety degree with reverse flow check, accepts standard and weatherized coils
- A7U Ninety degree with reverse flow check, accepts standard and weatherized coils
- A7V Ninety degree with reverse flow check, accepts standard and weatherized coils
- A8A Ninety degree with reverse flow check, accepts standard and weatherized coils
- A8B Ninety degree with reverse flow check, accepts standard and weatherized coils
- A8C Ninety degree with reverse flow check, accepts standard and weatherized coils
- A8I Ninety degree with reverse flow check, accepts standard and weatherized coils
- A8J Ninety degree with reverse flow check, accepts standard and weatherized coils
- A8K Ninety degree with reverse flow check, accepts standard and weatherized coils
- A8T Ninety degree with reverse flow check, accepts standard and weatherized coils
- A8U Ninety degree with reverse flow check, accepts standard and weatherized coils
- A8V Ninety degree with reverse flow check, accepts standard and weatherized coils
- E2A 减压阀.口2附止回阀.口1附测压口
- E2B 减压阀.口2附止回阀.口1附测压口
- E2C 减压阀.口2附止回阀.口1附测压口
- E2I 减压阀.口2附止回阀.口1附测压口
- E2J 减压阀.口2附止回阀.口1附测压口
- E2K 减压阀.口2附止回阀.口1附测压口
- E2T 减压阀.口2附止回阀.口1附测压口
- E2U 减压阀.口2附止回阀.口1附测压口
- E2V 减压阀.口2附止回阀.口1附测压口
- E3A 口2接两个油口,附止回阀,口1附测压口
- E3B 口2接两个油口,附止回阀,口1附测压口
- E3C 口2接两个油口,附止回阀,口1附测压口
- E3I 口2接两个油口,附止回阀,口1附测压口
- E3J 口2接两个油口,附止回阀,口1附测压口
- E3K 口2接两个油口,附止回阀,口1附测压口
- E3T 口2接两个油口,附止回阀,口1附测压口
- E3U 口2接两个油口,附止回阀,口1附测压口
- E3V 口2接两个油口,附止回阀,口1附测压口
- E4A 减压阀.口2附止回阀.口1附测压口
- E4B 减压阀.口2附止回阀.口1附测压口
- E4C 减压阀.口2附止回阀.口1附测压口
- E4I 减压阀.口2附止回阀.口1附测压口
- E4J 减压阀.口2附止回阀.口1附测压口
- E4K 减压阀.口2附止回阀.口1附测压口
- E4T 减压阀.口2附止回阀.口1附测压口
- E4U 减压阀.口2附止回阀.口1附测压口
- E4V 减压阀.口2附止回阀.口1附测压口
- E5B 口2外接两个油口,附止回阀,口1附测压口,口3加大
- E5C 口2外接两个油口,附止回阀,口1附测压口,口3加大
- E5J 口2外接两个油口,附止回阀,口1附测压口,口3加大
- E5K 口2外接两个油口,附止回阀,口1附测压口,口3加大
- E5U 口2外接两个油口,附止回阀,口1附测压口,口3加大
- E5V 口2外接两个油口,附止回阀,口1附测压口,口3加大
- E9B 3 cylinder sequence, with reverse checks
- E9C 3 cylinder sequence, with reverse checks
- E9J 3 cylinder sequence, with reverse checks
- E9K 3 cylinder sequence, with reverse checks
- E9U 3 cylinder sequence, with reverse checks
- E9V 3 cylinder sequence, with reverse checks
- EB4 ISO 03: Sequence into A or out of B with reverse flow check
- EB5 ISO 03: Sequence into B or out of A with reverse flow check
- EMB 排气
- EMC 排气
- EMJ 排气
- EMK 排气
- EMU 排气
- EMV 排气
- ENB 平衡缓冲/液压锁附梭阀
- ENC 平衡缓冲/液压锁附梭阀
- ENJ 平衡缓冲/液压锁附梭阀
- ENK 平衡缓冲/液压锁附梭阀
- ENU 平衡缓冲/液压锁附梭阀
- ENV 平衡缓冲/液压锁附梭阀
- EPB 平衡缓冲/液压锁附吸油
- EPC 平衡缓冲/液压锁附吸油
- EPJ 平衡缓冲/液压锁附吸油
- EPK 平衡缓冲/液压锁附吸油
- EPU 平衡缓冲/液压锁附吸油
- EPV 平衡缓冲/液压锁附吸油
- EQB 平衡缓冲/液压锁附吸油
- EQC 平衡缓冲/液压锁附吸油
- EQJ 平衡缓冲/液压锁附吸油
- EQK 平衡缓冲/液压锁附吸油
- EQU 平衡缓冲/液压锁附吸油
- EQV 平衡缓冲/液压锁附吸油
- FB2 ISO 03: A or B to T with make up check
- FB4 ISO 03: On A or B with reverse flow check
- FB7 ISO 05: BT泄压, AT附止回阀
- M4A 减压阀.口2附止回阀.口1附测压口
- M4B 减压阀.口2附止回阀.口1附测压口
- M4C 减压阀.口2附止回阀.口1附测压口
- M4I 减压阀.口2附止回阀.口1附测压口
- M4J 减压阀.口2附止回阀.口1附测压口
- M4K 减压阀.口2附止回阀.口1附测压口
- M4T 减压阀.口2附止回阀.口1附测压口
- M4U 减压阀.口2附止回阀.口1附测压口
- M4V 减压阀.口2附止回阀.口1附测压口
- U2T 平衡缓冲/液压锁附吸油
- W3I 减压阀.口2附止回阀.口1附测压口
- W3J 减压阀.口2附止回阀.口1附测压口
- W3K 减压阀.口2附止回阀.口1附测压口
- WJP P to T, check on P, bottom ports
- WJQ P to T, check on P, bottom ports
- WJR P to T, check on P, bottom ports
- WJS P to T, check on P, side ports
- WJT P to T, check on P, side ports
- WJV P to T, check on P, side ports
- X5B Staffa B080/B125/B200: 平衡缓冲/液压锁附吸油
- X5X ISO 03: Flow into or out of workport A or B
- X9S Volvo F12-60: 平衡缓冲/液压锁附吸油
- Z8L Staffa 4", 5 活塞: 平衡缓冲/液压锁附吸油
- Z8M Staffa 4", 5 活塞: 平衡缓冲/液压锁附吸油
- Z8N Staffa 4", 5 活塞: 平衡缓冲/液压锁附吸油
- Z8P Staffa 4", 5 活塞: 平衡缓冲/液压锁附吸油
- Z8Q Staffa 4", 5 活塞: 平衡缓冲/液压锁附吸油
- Z8R Staffa 4", 5 活塞: 平衡缓冲/液压锁附吸油
- Z8S Staffa 4", 5 活塞: 平衡缓冲/液压锁附吸油
额外来源 [ + ]
集锦
- Sun推出抗腐蚀产品解决方案
- T: 让您的系统更加灵活，让您的未来更加可期！
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Pilot Controlled Directional Cartridges Technical Tips
- Sun Cartridges with EPDM Seals
- Check Valves, Flow Control and Priority Flow Control Valves Technical Tips
- Sun FLeX™系列电磁阀&线圈
- 插孔节省™复合功能阀 简化你的液压方案
- Another Optimized Solution from Sun Hydraulics!
- Sun’s Cartridge Symbol Library
- Sun Introduces Additional Solenoid-Operated Pilot Valves
技术指导
- Sun插装阀插孔 (551.8 KB)
- 单向阀 节流阀 优先节流阀 (553.02 KB)
- 回路简化阀 (623.23 KB)
- 先导控制换向阀 (754.75 KB)
- Check, Flow Control, and Priority Flow Control Valves (537.44 KB)
技术信息