Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

系列1 - T-10A插孔和 T-13A插孔, 氟橡胶, 插装阀密封组件

全部展开

技术特性 [ + ]

Sun提供所有型号阀件的备用密封件。这些密封件包括所有的外部密封。丁晴橡胶，氟橡胶都可提供。注意：外部密封件由一种材料换成另一种材料，我们并不能保证可以正常使用，因为可能还有内部密封件的存在。

可售的插装阀密封件从购买日起有20年的保质期。该日期是从包装袋上日期算起。
系列1，两口的孔型具有两种型号：T-10A和T-13A。T-10A的孔型一般都是使用在需要更大流口的溢流应用，所以孔型更深。T-13A孔型被广泛应用于流量控制场合，具有更小的流口。所以两种孔型都是系列1，两口，它们使用同样的密封件，但是两种功能的阀之间孔型不能互换。

回到首页

插装阀安装数据 [ + ]

系列	1
插装阀螺纹	M20M20
阀头部安装六角尺寸	7/8 in.22,2 mm
阀安装扭矩	30 - 35 lbf ft41 - 47 Nm
插孔	T-10A

回到首页

Cartridge Seal Installation Variations [ + ]

插装阀分类	Models: CDAC, CNDB, CNDC, CXDA, CXDF, CSAC, CXDB, FLDA, Views: A,DModels: CDAC, CNDB, CNDC, CXDA, CXDF, CSAC, CXDB, FLDA, Views: A,D
插装阀分类	Models: NFCC, NFCD, Views: A,CModels: NFCC, NFCD, Views: A,C

回到首页

适用于 [ + ]

What models can this kit be used with?