Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

XMD系列, 6米, 12针 Deutsch 电缆单输出带ISO/DIN 43650, Form A

全部展开

技术特性 [ + ]

该单输出，12针德驰线缆组件用于和Sun的XMD-01电液控制器配合使用。线缆组件带有一个单独的ISO/DIN 43650 A型接口，在通过线圈夹固定控制器之后，该2针接口可以直接插入到FLeX或者770系列ISO/DIN 43650线圈上。

工艺等级为IPC-A-620，2级。
标准黑色UL 3289CSA 18标准线。
温度等级150℃ (302℉)。
安装类型XLPE。
电压等级750 VDC以及600 VAC。
DIN接头防护等级为IP 67或NEMA 6。
DIN接头最高工作电压300 VDC或250 VAC 50/60 Hz。
DIN接头温度范围-25°C~+80°C (-13°F~+176°F) 。

回到首页

技术数据 [ + ]

长度	6 m6 m
接头	Molex 93445-6212, Keying Option A, GreyMolex 93445-6212, Keying Option A, Grey
引线接头	Canfield 5J664000US0A or 5J664000EUOA, ISO DIN 43650, BlackCanfield 5J664000US0A or 5J664000EUOA, ISO DIN 43650, Black
引线长度	0,3 m0,3 m