Assembly Build Process

X
?

Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

✕

Caudal libre del lado a la nariz anti-retorno válvula

Capacidad: 30 gpm120 L/min. | Cavidad: T-5A

CXED : Caudal libre del lado a la nariz anti-retorno válvula

Technical Features [ + ]

Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.

Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
Will accept 5000 psi (350 bar) at ports 1 and 2.
Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Technical Data [ + ]

Notar: Los datos pueden variar según la configuración . Consulte la sección de CONFIGURATION

cavidad	T-5A
Series	2
Capacity	30 gpm120 L/min.
Maximum Operating Pressure	5000 psi350 bar
Maximum Valve Leakage at 110 SUS (24 cSt)	1 drops/min.0,07 cc/min.
Valve Hex Size	1 1/8 in.28,6 mm
Valve Installation Torque	45 - 50 lbf ft61 - 68 Nm
Model Weight	.40 lb0,20 kg
Seal kit - Cartridge	Buna: 990203007
Seal kit - Cartridge	Viton: 990203006

Performance Curves [ + ]

Performance Curve for CXED: Caudal libre del lado a la nariz anti-retorno válvula

Performance Curve for CXED: Caudal libre del lado a la nariz anti-retorno válvula

FAQs [ + ]

I need to discharge a large accumulator. How can I increase the capacity of my discharge circuit?

Because of the very high ratio, the COFO has limited capacity. The discharge path is across a .050 inch (1,3 mm) diameter orifice. If you have large accumulators combined with low precharge pressures, this may not discharge the energy quickly enough. Using the COFO XDN cartridge in conjunction with an LODA XDN will provide capacity for larger applications.

How big is a drop of hydraulic oil?

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Direct acting or pilot operated - what do I use?

Direct-acting valves are used to prevent over pressure, and pilot-operated valves are used to regulate pressure. If you are unsure, use a direct-acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot-operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.

What parts of the Sun cartridge valve are field serviceable?

Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.

Related Accessories [ + ]

B2A Ninety degree with reverse flow check - reducing
B2B Ninety degree with reverse flow check - reducing
B2C Ninety degree with reverse flow check - reducing
B2D Ninety degree with reverse flow check - reducing
B2I Ninety degree with reverse flow check - reducing
B2J Ninety degree with reverse flow check - reducing
B2K Ninety degree with reverse flow check - reducing
B2U Ninety degree with reverse flow check - reducing
B2V Ninety degree with reverse flow check - reducing
B2W Ninety degree with reverse flow check - reducing
B3B Through port 2 with reverse flow check
B3C Through port 2 with reverse flow check
B3D Through port 2 with reverse flow check
B3J Through port 2 with reverse flow check
B3K Through port 2 with reverse flow check
B3L Through port 2 with reverse flow check
B3U Through port 2 with reverse flow check
B3V Through port 2 with reverse flow check
B3W Through port 2 with reverse flow check
B4B Ninety degree with reverse flow check - reducing
B4C Ninety degree with reverse flow check - reducing
B4D Ninety degree with reverse flow check - reducing
B4J Ninety degree with reverse flow check - reducing
B4K Ninety degree with reverse flow check - reducing
B4L Ninety degree with reverse flow check - reducing
B4U Ninety degree with reverse flow check - reducing
B4V Ninety degree with reverse flow check - reducing
B4W Ninety degree with reverse flow check - reducing
B5C Through port 2 with reverse flow check and high capacity port 3
B5D Through port 2 with reverse flow check and high capacity port 3
B5K Through port 2 with reverse flow check and high capacity port 3
B5L Through port 2 with reverse flow check and high capacity port 3
B5V Through port 2 with reverse flow check and high capacity port 3
B5W Through port 2 with reverse flow check and high capacity port 3
BB4 ISO 05: Sequence into A or out of B with reverse flow check
BB5 ISO 05: Sequence into B or out of A with reverse flow check
BJ4 ISO 05 - X&Y: Sequence into A or out of B with reverse flow check
BJ5 ISO 05 - X&Y: Sequence into B or out of A with reverse flow check
BMC Amortiguar y bloquear
BMD Amortiguar y bloquear
BMK Amortiguar y bloquear
BML Amortiguar y bloquear
BMV Amortiguar y bloquear
BMW Amortiguar y bloquear
BNC Cushion lock with shuttle
BND Cushion lock with shuttle
BNK Cushion lock with shuttle
BNL Cushion lock with shuttle
BNV Cushion lock with shuttle
BNW Cushion lock with shuttle
BPC Cushion lock with make up checks
BPD Cushion lock with make up checks
BPK Cushion lock with make up checks
BPL Cushion lock with make up checks
BPV Cushion lock with make up checks
BPW Cushion lock with make up checks
BQC Cushion lock with make up checks and shuttle
BQD Cushion lock with make up checks and shuttle
BQK Cushion lock with make up checks and shuttle
BQL Cushion lock with make up checks and shuttle
BQV Cushion lock with make up checks and shuttle
BQW Cushion lock with make up checks and shuttle
N4A Ninety degree with reverse flow check - reducing
N4B Ninety degree with reverse flow check - reducing
N4C Ninety degree with reverse flow check - reducing
N4D Ninety degree with reverse flow check - reducing
N4I Ninety degree with reverse flow check - reducing
N4J Ninety degree with reverse flow check - reducing
N4K Ninety degree with reverse flow check - reducing
N4L Ninety degree with reverse flow check - reducing
N4T Ninety degree with reverse flow check - reducing
N4U Ninety degree with reverse flow check - reducing
N4V Ninety degree with reverse flow check - reducing
N4W Ninety degree with reverse flow check - reducing
W3F Ninety degree with reverse flow check - reducing
W3G Ninety degree with reverse flow check - reducing
W3H Ninety degree with reverse flow check - reducing
WWD Danfoss OMP/OMR: Cushion lock with make up checks and shuttle
WWE Danfoss OMP/OMR: Cushion lock with make up checks and shuttle
WWF Danfoss OMP/OMR: Cushion lock with make up checks and shuttle
WWG Danfoss OMP/OMR: Cushion lock with make up checks and shuttle
X9K Danfoss OMS: Cushion lock with make up checks
X9N Danfoss OMS: Cushion lock with make up checks
X9P Danfoss OMS: Cushion lock with make up checks
X9R Danfoss OMS: Cushion lock with make up checks

Additional Resources [ + ]

Realces

Technical Tips

Manufacturing Sun Cartridge Cavities (522.27 KB)
Check, Flow Control, and Priority Flow Control Valves (537.44 KB)

Technical Information

Modelo

reset to default

CXEDXCN

CXED

Configuration Rules

When the modifier is /AP, the control must be L or X
When the modifier is /LH, the control must be L or X
When the seal is E, the control must be L or X