Serie 2 - cavidad T-3A y cavidad T-5A, Viton, cartucho juego de sellos
Technical Features [ + ]
Sun offers replacement seal kits for all cartridge models. These kits include all of the external seals on the cartridge along with installation instructions. Seal kits are available in Buna-N and Viton for all models, along with EPDM and polyurethane for many models. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
- The Series 2, two port cavity comes in two versions: the T-3A and the T-5A. The T-3A cavity is typically used in relief applications which require larger port areas, hence a deeper cavity. The T-5A cavity is typically used in flow control applications and utilizes a smaller port area. Since both cavities are Series 2, two port, they share common seal kits, but exclude the possibility of cartridge interchangeability between the two functions.
- The shelf life for this cartridge seal kit is twenty years from date of purchase. This date will be printed on the kit packaging.
Cartridge Installation Data [ + ]
| Series | 2 |
| Cartridge Thread | 1"-14 UNS1"-14 UNS |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| cavidad | T-3A & T-5A |
Used With [ + ]
What models can this kit be used with?
- CNEC Fixed-orifice, no compensado por presión , control de caudal válvula con anti-retorno de caudal inverso
- CNFC Caudal libre de nariz al lado anti-retorno válvula con orificio de desvió
- CXED Caudal libre del lado a la nariz anti-retorno válvula
- CXFA Caudal libre de nariz al lado anti-retorno válvula
- CXFHZ Caudal libre de nariz al lado anti-retorno válvula con indicador de posición
- DFDA2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 1-2
- DFDA8 2-vías , disco direccional válvula con cavidad de control T-8A integral - control 1-2
- DFDB2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 2-1
- DFDB8 2-vías , disco direccional válvula con cavidad de control T-8A integral - control 2-1
- FCDB Fixed-orifice compensado por presión control de caudal válvula con anti-retorno de caudal inverso
- FDCB Totalmente ajustable compensado por presión control de caudal válvula con anti-retorno de caudal inverso
- FLFA Filtro
- FPFK Pilot-operated, normalmente cerrado, electro-proporcional estrangulación con anti-retorno de caudal inverso
- FQEA Fixed-orifice, fusible de caudal válvula
- FXDA Fixed-orifice, compensado por presión control de caudal válvula
- FXDA8 De venteo fixed-orifice, compensado por presión control de caudal válvula con cavidad de control T-8A integral
- NCEB Totalmente ajustable aguja válvula con anti-retorno de caudal inverso
- NCEC Totalmente ajustable aguja válvula con anti-retorno de caudal inverso
- NFDC Totalmente ajustable aguja válvula
- NFDD Totalmente ajustable aguja válvula
- NQEB Purga de aire y poner en marcha válvula
- RBAA Acción-directa alivio válvula - capacidad de pilotaje
- RBAB Controlado por aire, acción-directa alivio válvula - capacidad de pilotaje
- RGFA Low-pressure-range, acción-directa alivio válvula
- RPGC Pilot-operated, pistón balanceado alivio válvula
- RPGC8 Pilot-operated, pistón balanceado alivio módulo principal con cavidad de control T-8A integral
- RPGD Controlado por aire, pilot-operated, pistón balanceado alivio válvula
- RPGE Acción-rápida , pilot-operated, pistón balanceado alivio válvula
- RQGB Tirar-abajo, pilot-operated, pistón balanceado alivio válvula
- SCEB De referencia atmosférica , acción-directa secuencia válvula con anti-retorno de caudal inverso
- XCCA Todos los puertos bloqueados tapón de cavidad
- XCOA Todos los puertos abiertos tapón de cavidad
Notes [ + ]
- Install back-up rings and O-rings as shown in views.
- When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
- When installing cartridge - be sure to torque to recommended value.
- During 1985, SUN made a running change of all external seals on Series 2 cartridges (1-1/8 in. (28,6 mm) hex, 1-14 thd). The seals were changed from 3/32 in. (2,62 mm) c/s to 1/16 in (1,7/8 mm) c/s o-rings and backup rings.
- Use the kit which contains the same size (c/s) seals as those used on the cartridge being repaired. Do not change cartridge o-ring c/s sizes.
Additional Resources [ + ]
Technical Information