直动式溢流阀 - 在单向阀后
![HRDB : 直动式溢流阀 - 在单向阀后](https://cmsimages.sunhydraulics.com/cartg_hrdb.gif)
在单向阀后的溢流阀是一种复合型阀,此阀在单向阀功能后并入了直动式溢流阀。单向阀流量为进口(口2)到系统口(口1)。当压力在系统口(口1)达到阀的设定值,阀开始向油箱(口3)溢流,节流以限制压力上升。此类阀调节平稳、噪声小,基本为零泄漏,抗油污能力强,防堵塞并且响应速度快。
- 注意!该阀偏离正常的溢流阀流道,不能与Sun现存的溢流阀阀块一起工作。
- 此阀可以在油路的系统侧提供溢流保护。
- 调节螺杆的密封暴露在系统压力下。这意味着只有当压力被移除时,此阀才可被调节。设定流程为;检查设定,移除压力,调节阀,检查新设定。
- 选择溢流阀的弹簧范围时,为确保最大的可重复性,目标溢流设定值要接近最小和最大压力的中间范围。
- 适合使用在负载锁紧应用中。
- 此阀的单向阀功能部分最大泄漏速率不超过1滴/分钟(0,07 cc/min)。
- 直动式溢流阀具有快速响应特性,从而减少压力冲击并可提供低的回座泄漏(在开启压力的85%时低于5滴/分钟(0,3 cc/min)),单向阀泄漏小于1滴/分钟(0,07 cc/min)。
- 利用Sun浮动结构减少由于过量安装扭矩或插孔/插装阀加工误差带来的内部零件粘结的可能性。
插孔 | T-11A |
系列 | 1 |
通流能力 | 10 gpm40 L/min. |
最大操作压力 | 5000 psi350 bar |
工厂默认的设定值 | 4 gpm15 L/min. |
回座时最大泄漏 | 5 drops/min.0,3 cc/min. |
单向开启压力 | 25 psi1,7 bar |
额定响应时间 | 10 ms10 ms |
调节 - 从最小设定到最大设定的顺时针圈数 | 66 |
阀头部安装六角尺寸 | 7/8 in.22,2 mm |
阀安装扭矩 | 30 - 35 lbf ft41 - 47 Nm |
调节螺栓的内六角尺寸 | 5/32 in.4 mm |
锁紧螺母六角尺寸 | 9/16 in.15 mm |
锁紧螺母力矩 | 80 - 90 lbf in.9 - 10 Nm |
Seal kit - Cartridge | Buna: 990011007 |
Seal kit - Cartridge | Polyurethane: 990011002 |
Seal kit - Cartridge | Viton: 990011006 |
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Maybe not. We build in a good amount of overlap in the kick-down reliefs to prevent false tripping. This means they are not as fast as our standard pilot operated reliefs. A direct-acting relief valve set just above the kick-down relief valve would be good insurance.
Direct acting valves are used to prevent over pressure and pilot operated valves are used to regulate pressure. If you are unsure, use a direct acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.
设置压力的误差在产品的性能参数页中都有详细说明,您可以通过点击可选产品网页中的更多产品信息到达产品性能参数页面。
One graphic example is on a portable grain auger for silos. When the farmer gets caught in the auger the kick-down relief trips and allows him to escape.
- Another Optimized Solution from Sun Hydraulics!
- Get the relief you need. Adjustable. Ventable. Blockable. FLeX-ible.
- 先导式,平衡锥阀结构溢流阀
- Sun推出抗腐蚀产品解决方案
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- SUN三角调节手柄现可以作为标准控制方式提供
- 先导控制,平衡式锥阀芯 ,防冲击溢流阀
- 'Soft' Relief Eliminates Pressure Spikes
- 精确控制反比例溢流阀
- Sun Cartridges with EPDM Seals
- Sun Introduces 'Hybrid' Valves
- Sun FLeX™系列电磁阀&线圈
- RDDT / RDFT- CE/TÜV 认证压力溢流阀
- 插孔节省™复合功能阀 简化你的液压方案
- Pressure Relief and Regulating Cartridge Valve Technical Tips
- Solenoid Operated Ventable Relief Packages
- Sun’s Cartridge Symbol Library