Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

3位4通, 进口节流比例换向阀

流量: 18 gpm70 L/min. | 插孔: T-52A

全部展开

技术特性 [ + ]

此阀是3位4通比例方向阀。中位时，口2和口4接通口5泄油而口3关闭。口1先导压力抵抗弹簧力会在口3到口4方向上形成一个与口1压力大小成比例的可变节流口。口6的先导压力打开口3到口2流道。液动力，弹簧力和先导压力平衡下会使此阀随负载压力变化而产生一定程度的自补偿效果。口1和口6的压力直接相互抵抗。

对于1口和6口的运行压力一般不应超过500psi（35bar）。
这些阀或许需要通过外部调节逻辑阀提供压力补偿。对并联回路采用LR*C-XHN，或者对于节流回路采用LP*C-XHN。
这款阀提供一定程度的自我补偿，可以用于流量控制。为提高流量控制的精准度，外部的逻辑调节阀可以用来保证大范围流量和压力情况下稳定的流量。可参考附加信息中的曲线。
口1和口6之间相互直接作用。
Sun浮动式的结构可以最大限度地减少由于过大的安装扭矩以及孔型加工的误差所造成的干涉现象

回到首页

技术数据 [ + ]

注意：技术参数可能因产品配置而不同。请查看产品配置部分。

插孔	T-52A
系列	2
通流能力	18 gpm70 L/min.
最大操作压力	5000 psi350 bar
阀切换需要的先导压力	50 - 120 psi3,5 - 8 bar
完全打开所需要的先导压力	290 - 340 psi20 - 23 bar
110 SUS (24 cSt)下的最大泄漏	2.7 in³/min.@500 psi44 cc/min.@35 bar
	.04 in³0,66 cc
在50%命令下滞环	±35%±35%
阀头部安装六角尺寸	1 1/8 in.28,6 mm
补偿流量(使用LPJCXHN)	17 - 21 gpm64 - 80 L/min.
阀安装扭矩	45 - 50 lbf ft61 - 68 Nm
型号重量	1.00 lb0,45 kg
Seal kit - Cartridge	Buna: 990052007
Seal kit - Cartridge	Viton: 990052006

回到首页

性能曲线 [ + ]

Performance Curve for FTDC: 3位4通, 进口节流比例换向阀

回到首页

常见问题 [ + ]

How big is a drop of hydraulic oil?

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Direct acting, pilot operated, what do I use?

Direct acting valves are used to prevent over pressure and pilot operated valves are used to regulate pressure. If you are unsure, use a direct acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.

What parts of the Sun cartridge valve are field serviceable?

Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.

回到首页

额外来源 [ + ]

集锦