Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

2通, 直动式, 电磁锥阀换向阀带遮盖和位置切换

流量: 6 gpm23 L/min. | 插孔: T-13A

全部展开

技术特性 [ + ]

切换说明 [ + ]

技术数据 [ + ]

性能曲线 [ + ]

常见问题 [ + ]

Related Models [ + ]

备注 [ + ]

额外来源 [ + ]

Coil Information [ + ]

DTCAZCN224

Z-Control, C-Poppet

查看所有

产品配置规则

供应电压	20-30 VDC20-30 VDC
运行温度范围	-25 to 80 °C-25 to 80 °C
振动	≥ 50g, 0-500 impulses/sec≥ 50g, 0-500 impulses/sec
冲击	>50 g, 1ms>50 g, 1ms
反极性保护	是是
最大输出负载	≤ 400 mA, Duty Ratio 100%≤ 400 mA, Duty Ratio 100%
短路保护	Yes, Load Short UnlimitedYes, Load Short Unlimited
及时旋转	≤ 25 ms≤ 25 ms
滞环	≤ .002 in.≤ .002 in.
热量变化 - 0~80 °C ≤ ±	.004 in.0,1 mm
电磁兼容	DIN EN 61000-6-1/2/3/4DIN EN 61000-6-1/2/3/4
接头	M12 X 1 (4) PinM12 X 1 (4) Pin
接头防护等级	IP65IP65

插孔	T-13A
系列	1
通流能力	6 gpm23 L/min.
最大操作压力	5000 psi350 bar
110 SUS (24 cSt)下的最大泄漏	10 drops/min.@5000 psi0,7 cc/min.@350 bar
额定响应时间	50 ms50 ms
切换频率	15,000 max. cycles/hr15,000 max. cycles/hr
衔铁直径	.75 in.19 mm
阀头部安装六角尺寸	7/8 in.22,2 mm
阀安装扭矩	30 - 35 lbf ft41 - 47 Nm
型号重量	.50 lb0,25 kg
Seal kit - Cartridge	Buna: 990413007
Seal kit - Cartridge	EPDM: 990413014
Seal kit - Cartridge	Polyurethane: 990413002
Seal kit - Cartridge	Viton: 990413006

DTCAZ | 插装阀 » Solenoid Operated » 2-通 | Sun Hydraulics

Assembly Build Process

Assembly Build Process

LoadMatch™ ROI Calculator

2通, 直动式, 电磁锥阀换向阀带遮盖和位置切换

Symbols for DTCAZ

Symbols for DTCAZ

Footer

2通, 直动式, 电磁锥阀换向阀 带遮盖 和 位置切换

Symbols for DTCAZ

Symbols for DTCAZ

Footer

2通, 直动式, 电磁锥阀换向阀带遮盖和位置切换