Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

3通, 直动式, 平衡滑阀, 电磁换向阀, 3600 psi (250 bar) - 通用孔型

流量: 4 gpm15 L/min. | 插孔: SC-08-03

全部展开

技术特性 [ + ]

此类2位3通电磁阀为直动式，平衡滑阀结构换向阀。

流量等级可能会受阀芯配置以及进油口的影响。详见功率与曲线。
此阀可被直接驱动且不需要最小液压操作压力。
电磁铁组件的疲劳耐压等级为3600 psi (250 bar)。
该阀提供推式手动应急选项。
所有油口最大工作压力都为3600 psi (250 bar)。
该阀安装力矩应当为22 lbf ft (30 Nm)以获得最佳性能。
金属线圈螺母为电磁功能的一部分，其应当正确安装到位以保证阀的正常功能。
线圈接头选项提供最高IP67的防护等级。详见线圈产品页面。
线圈可以双向安装到螺线管上。

回到首页

技术数据 [ + ]

注意：技术参数可能因产品配置而不同。请查看产品配置部分。

插孔	SC-08-03
系列	0C
通流能力	4 gpm15 L/min.
最大操作压力	3600 psi250 bar
典型阀泄漏，在110 SUS (24 cSt)	4.9 in³/min.@3600 psi80,2 cc/min.@250 bar
额定响应时间	50 ms50 ms
衔铁直径	.51 in..51 in.
阀头部安装六角尺寸	24 mm24 mm
线圈锁紧螺母扭矩	3.5 - 3.9 lbf ft4,8 - 5,3 Nm
阀安装扭矩	21 - 23 lbf ft28 - 31 Nm
型号重量	.40 lb0,20 kg
Seal kit - Cartridge	Buna: 99C083007
Seal kit - Cartridge	Viton: 99C083006

回到首页

性能曲线 [ + ]

Performance Curve for DMTA: 3通, 直动式, 平衡滑阀, 电磁换向阀, 3600 psi (250 bar) - 通用孔型

回到首页

常见问题 [ + ]

How big is a drop of hydraulic oil?

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Direct acting, pilot operated, what do I use?

Direct acting valves are used to prevent over pressure and pilot operated valves are used to regulate pressure. If you are unsure, use a direct acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.

Where would I use a DR__ instead of a DP__?

In many circuits the directional cartridge is set to shift at a low pressure no matter how high the pilot pressure goes. If you use a DP__ , the pilot flow increases to significant amounts. A DR__ however will only consume a small amount of flow. A DP__ is useful when you want to block or open the pilot flow to shift the valve.

What parts of the Sun cartridge valve are field serviceable?

Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.

回到首页

额外来源 [ + ]

集锦