Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

2通, 电磁操作方向锥阀阀带逆流单向阀 - common cavity

流量: 8 gpm30 L/min. | 插孔: SC-08-02

全部展开

技术特性 [ + ]

This is a 2 way, 2 stage, solenoid operated poppet valve with a reverse free flow check. The valve exhibits low leakage when closed and is available in either normally open or normally closed configuration, with or without a manual override. When open, the flow direction is from Port 2 to Port 1. When closed, a reverse free-flow check allows flow from Port 1 to Port 2. In the open position, flow from Port 1 to Port 2 is restricted to pilot flow only.

电磁铁组件的疲劳耐压等级为5000 psi (350 bar)。
该阀安装力矩应当为22 lbf ft (30 Nm)以获得最佳性能。
The check function offers very low leakage rates.
All ports in all valve variants are rated to max operating pressure of 4300 PSI (300 bar).
该阀常闭选项可提供旋开形式的手动操控（L控制）。该选项疲劳耐压等级为5000 psi (350 bar)。
The valve is available with a manual push-type, with detent, override option (L control) on the normally open configuration. This option is also fatigue rated for 5000 psi (350 bar).
金属线圈螺母为电磁功能的一部分，其应当正确安装到位以保证阀的正常功能。
线圈接头选项提供最高IP67的防护等级。详见线圈产品页面。
线圈可以双向安装到螺线管上。

回到首页

技术数据 [ + ]

注意：技术参数可能因产品配置而不同。请查看产品配置部分。

插孔	SC-08-02
系列	0C
通流能力	8 gpm30 L/min.
110 SUS (24 cSt)下的最大泄漏	15 drops/min.1 cc/min.
额定响应时间	60 ms60 ms
阀头部安装六角尺寸	7/8 in.22,2 mm
阀安装扭矩	19 - 22 lbf ft26 - 30 Nm
型号重量	.35 lb0,15 kg

回到首页

性能曲线 [ + ]

Performance Curve for DFTB: 2通, 电磁操作方向锥阀阀带逆流单向阀 - common cavity

回到首页

常见问题 [ + ]

Direct acting, pilot operated, what do I use?

Direct acting valves are used to prevent over pressure and pilot operated valves are used to regulate pressure. If you are unsure, use a direct acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.

How big is a drop of hydraulic oil?

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Where would I use a DR__ instead of a DP__?

In many circuits the directional cartridge is set to shift at a low pressure no matter how high the pilot pressure goes. If you use a DP__ , the pilot flow increases to significant amounts. A DR__ however will only consume a small amount of flow. A DP__ is useful when you want to block or open the pilot flow to shift the valve.

What parts of the Sun cartridge valve are field serviceable?

Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.

回到首页

额外来源 [ + ]

集锦