Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

3位4通, 先导切换换向阀

流量: 20 gpm80 L/min. | 插孔: T-52A

全部展开

技术特性 [ + ]

技术数据 [ + ]

性能曲线 [ + ]

常见问题 [ + ]

额外来源 [ + ]

Included Components[ + ]

型号

返回默认

DDDCXCN

C-Spool

查看所有

产品配置规则

如何购买

Assembly Build Process

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

Creer Un Ensemble Corps Cartouche

Trouver Des Blocs Compatibles

When the modifier is /AP, the control must be X

插孔	T-52A
系列	2
通流能力	20 gpm80 L/min.
最大操作压力	5000 psi350 bar
切换阀所需最小先导压力	150 psi10,5 bar
110 SUS (24 cSt)下的最大泄漏	2 in³/min.@1000 psi30 cc/min.@70 bar
	.05 in³0,82 cc
阀头部安装六角尺寸	1 1/8 in.28,6 mm
阀安装扭矩	45 - 50 lbf ft61 - 68 Nm
Seal kit - Cartridge	Buna: 990052007
Seal kit - Cartridge	Viton: 990052006

Part	Beschreibung	Anzahl
CXFAXCN	Cartridge	1
SQFBLAN	Cartridge - Primary	1

DDDC | 插装阀 » Directional » 4-通 | Sun Hydraulics

Assembly Build Process

Assembly Build Process

LoadMatch™ ROI Calculator

3位4通, 先导切换换向阀

Symbols for DDDC

Symbols for DDDC

Assembly Build Process

Footer

3位4通, 先导切换 换向阀

Symbols for DDDC

Symbols for DDDC

Assembly Build Process

Footer

3位4通, 先导切换换向阀