Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

3位4通, 先导切换换向阀

流量: 25 - 100 gpm95 - 380 L/min. | 插孔: T-63A

全部展开

技术特性 [ + ]

3位4通换向阀为弹簧对中的6油口阀，它可以按阀芯选项的选择来配置。口3为供油口且各油口都可承受5000psi(350 bar)压力。此先导换向阀的流通能力取决于指定的阀芯类型。

所有的口都可承受5000psi（350bar）压力，包括想x，y先导口（5口和6口）。
液动力是造成不同结构的阀芯有着不同流量和性能最重要的原因。液动力和流量以及压降是成正比的。一般来说，它们是趋于流道关闭。对于弹簧置中，中位导通的阀芯结构这种现象更为明显。如果液动力大于弹簧的趋中力，阀芯将很有能无法完全复位。因此大流量应在低压的情况下使用。
技术指标中泄漏值时针对每一路的值。
先导口5,6是与工作口之间完全密封。
配置EPDM密封圈的插装阀可用在磷酸酯液压油系统。暴露在石油基液压油或润滑油脂中会损坏密封圈。
更坚硬的阀芯和阀套可以保证一贯的阀芯泄漏等级以及更好的耐磨性能。
Sun浮动式的结构可以最大限度地减少由于过大的安装扭矩以及孔型加工的误差所造成的干涉现象。

回到首页

技术数据 [ + ]

注意：技术参数可能因产品配置而不同。请查看产品配置部分。

插孔	T-63A
系列	3
通流能力	25 - 100 gpm95 - 380 L/min.
最大操作压力	5000 psi350 bar
切换阀所需最小先导压力	125 psi9 bar
110 SUS (24 cSt)下的最大泄漏	2 in³/min.@1000 psi30 cc/min.@70 bar
	.17 in³2,8 cc
阀头部安装六角尺寸	1 1/4 in.31,8 mm
阀安装扭矩	150 - 160 lbf ft203 - 217 Nm
型号重量	1.80 lb0,80 kg
Seal kit - Cartridge	Buna: 990063007
Seal kit - Cartridge	EPDM: 990063014
Seal kit - Cartridge	Polyurethane: 990063002
Seal kit - Cartridge	Viton: 990063006

回到首页

性能曲线 [ + ]

Performance Curve for DCEC: 3位4通, 先导切换换向阀

回到首页

常见问题 [ + ]

Direct acting, pilot operated, what do I use?

Direct acting valves are used to prevent over pressure and pilot operated valves are used to regulate pressure. If you are unsure, use a direct acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.

How big is a drop of hydraulic oil?

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

What parts of the Sun cartridge valve are field serviceable?

Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.

回到首页

额外来源 [ + ]

集锦