Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

鼻尖到鼻侧自由流单向阀带口3堵塞

流量: 80 gpm320 L/min. | 插孔: T-17A

全部展开

技术特性 [ + ]

自由流，鼻端孔到侧孔伪单向阀功能为2口单向阀，并使用在3口插孔中同时阀的口3堵住。此类阀在3口插孔需要放置单向阀的油路中有作用。

单向阀具备非常低的泄漏等级，其中最大泄漏量每分钟少于1滴（0.07cc/min。）
Sun浮动式的结构可以最大限度地减少由于过大的安装扭矩以及孔型加工的误差所造成的干涉现象

回到首页

技术数据 [ + ]

注意：技术参数可能因产品配置而不同。请查看产品配置部分。

插孔	T-17A
系列	3
通流能力	80 gpm320 L/min.
最大操作压力	5000 psi350 bar
110 SUS (24 cSt)下的最大泄漏	1 drops/min.0,07 cc/min.
阀头部安装六角尺寸	1 1/4 in.31,8 mm
阀安装扭矩	150 - 160 lbf ft203 - 217 Nm
Seal kit - Cartridge	Buna: 990017007
Seal kit - Cartridge	Polyurethane: 990017002
Seal kit - Cartridge	Viton: 990017006

回到首页

性能曲线 [ + ]

Performance Curve for CXHC: 鼻尖到鼻侧自由流单向阀带口3堵塞

回到首页

常见问题 [ + ]

Direct acting, pilot operated, what do I use?

Direct acting valves are used to prevent over pressure and pilot operated valves are used to regulate pressure. If you are unsure, use a direct acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.

I need to discharge a large accumulator. How can I increase the capacity of my discharge circuit?

Because of the very high ratio, the COFO has limited capacity. The discharge path is across a .050 inch (1,3 mm) diameter orifice. If you have large accumulators combined with low precharge pressures, this may not discharge the energy quickly enough. Using the COFO XDN cartridge in conjunction with an LODA XDN will provide capacity for larger applications.

How big is a drop of hydraulic oil?

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

What parts of the Sun cartridge valve are field serviceable?

Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.

回到首页

额外来源 [ + ]

集锦

技术指导

Sun插装阀插孔 (551.8 KB)
单向阀节流阀优先节流阀 (553.02 KB)
回路简化阀 (623.23 KB)
先导控制换向阀 (754.75 KB)
Check, Flow Control, and Priority Flow Control Valves (537.44 KB)

技术信息

回到首页

CXHCXCN

产品配置规则

CXHC | 插装阀 » Directional » 单向阀 | Sun Hydraulics

Assembly Build Process

Assembly Build Process

鼻尖到鼻侧自由流单向阀带口3堵塞

Footer

鼻尖到鼻侧自由流 单向阀 带口3堵塞

Footer

鼻尖到鼻侧自由流单向阀带口3堵塞