Model: CXGDXCN
鼻侧到鼻尖自由流 单向阀
流量: 60 gpm240 L/min. |
插孔: T-16A
Symbols for CXGD
技术特性 [ + ]
自由流，侧孔到鼻端孔单向阀为开/关液路元件，它允许液流从进口（口2）向出口（口1）自由流动，截止其反向液流。
- 两口单向阀都是采用相同的孔型，不过需要注意流动的方向有可能相反
- 在已有阀块孔加工错误的回路中，这些阀可考虑使用为回路简化阀。旁路到鼻尖（2口到1口）的2口单向阀流量等级比鼻尖到旁路（1口到2口）的2口单向阀少30%。后者为优先推荐型号。
- 单向阀具备非常低的泄漏等级，其中最大泄漏量每分钟少于1滴（0.07cc/min。）
- 1口和2口均可承受5000psi（350bar）的压力。
- 配置EPDM密封圈的插装阀用于磷酸酯液压油系统。暴露在石油基液压油或润滑油脂中会损坏密封圈。
- Sun浮动式的结构可以最大限度地减少由于过大的安装扭矩以及孔型加工的误差所造成的干涉现象
技术数据 [ + ]
注意：技术参数可能因产品配置而不同。请查看产品配置部分。
| 插孔 | T-16A |
| 系列 | 3 |
| 通流能力 | 60 gpm240 L/min. |
| 最大操作压力 | 5000 psi350 bar |
| 110 SUS (24 cSt)下的最大泄漏 | 1 drops/min.0,07 cc/min. |
| 阀头部安装六角尺寸 | 1 1/4 in.31,8 mm |
| 阀安装扭矩 | 150 - 160 lbf ft203 - 217 Nm |
| 型号重量 | 1.60 lb0,70 kg |
| Seal kit - Cartridge | Buna: 990016007 |
| Seal kit - Cartridge | EPDM: 990016014 |
| Seal kit - Cartridge | Polyurethane: 990016002 |
| Seal kit - Cartridge | Viton: 990016006 |
性能曲线 [ + ]
常见问题 [ + ]
Because of the very high ratio, the COFO has limited capacity. The discharge path is across a .050 inch (1,3 mm) diameter orifice. If you have large accumulators combined with low precharge pressures, this may not discharge the energy quickly enough. Using the COFO XDN cartridge in conjunction with an LODA XDN will provide capacity for larger applications.
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Direct acting valves are used to prevent over pressure and pilot operated valves are used to regulate pressure. If you are unsure, use a direct acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.
Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
Related Accessories [ + ]
- BK4 ISO 07: Sequence into A with reverse flow check
- BK5 ISO 07: Sequence into B with reverse flow check
- BK6 ISO 07: Sequence out of A with reverse flow check
- BK7 ISO 07: Sequence out of B with reverse flow check
- H24 减压阀.口2附止回阀.口1附测压口
- H25 减压阀.口2附止回阀.口1附测压口
- H2D 减压阀.口2附止回阀.口1附测压口
- H2E 减压阀.口2附止回阀.口1附测压口
- H2F 减压阀.口2附止回阀.口1附测压口
- H2L 减压阀.口2附止回阀.口1附测压口
- H2M 减压阀.口2附止回阀.口1附测压口
- H2N 减压阀.口2附止回阀.口1附测压口
- H2P 减压阀.口2附止回阀.口1附测压口
- H2Q 减压阀.口2附止回阀.口1附测压口
- H2W 减压阀.口2附止回阀.口1附测压口
- H2X 减压阀.口2附止回阀.口1附测压口
- H3D 口2接两个油口,附止回阀,口1附测压口
- H3E 口2接两个油口,附止回阀,口1附测压口
- H3F 口2接两个油口,附止回阀,口1附测压口
- H3L 口2接两个油口,附止回阀,口1附测压口
- H3M 口2接两个油口,附止回阀,口1附测压口
- H3N 口2接两个油口,附止回阀,口1附测压口
- H3P 口2接两个油口,附止回阀,口1附测压口
- H3W 口2接两个油口,附止回阀,口1附测压口
- H3X 口2接两个油口,附止回阀,口1附测压口
- H3Y 口2接两个油口,附止回阀,口1附测压口
- H44 减压阀.口2附止回阀.口1附测压口
- H45 减压阀.口2附止回阀.口1附测压口
- H4D 减压阀.口2附止回阀.口1附测压口
- H4E 减压阀.口2附止回阀.口1附测压口
- H4F 减压阀.口2附止回阀.口1附测压口
- H4L 减压阀.口2附止回阀.口1附测压口
- H4M 减压阀.口2附止回阀.口1附测压口
- H4N 减压阀.口2附止回阀.口1附测压口
- H4P 减压阀.口2附止回阀.口1附测压口
- H4Q 减压阀.口2附止回阀.口1附测压口
- H4W 减压阀.口2附止回阀.口1附测压口
- H4X 减压阀.口2附止回阀.口1附测压口
- H4Y 减压阀.口2附止回阀.口1附测压口
- HBJ ISO 08: 位于B通路上附止回
- HBK ISO 08: On A, port 3 to T
- HME 排气
- HMF 排气
- HMM 排气
- HMN 排气
- HMX 排气
- HMY 排气
- HNE 平衡缓冲/液压锁附梭阀
- HNF 平衡缓冲/液压锁附梭阀
- HNM 平衡缓冲/液压锁附梭阀
- HNN 平衡缓冲/液压锁附梭阀
- HNX 平衡缓冲/液压锁附梭阀
- HNY 平衡缓冲/液压锁附梭阀
- HPE 平衡缓冲/液压锁附吸油
- HPF 平衡缓冲/液压锁附吸油
- HPM 平衡缓冲/液压锁附吸油
- HPN 平衡缓冲/液压锁附吸油
- HPX 平衡缓冲/液压锁附吸油
- HPY 平衡缓冲/液压锁附吸油
- HQE 平衡缓冲/液压锁附吸油
- HQF 平衡缓冲/液压锁附吸油
- HQM 平衡缓冲/液压锁附吸油
- HQN 平衡缓冲/液压锁附吸油
- HQX 平衡缓冲/液压锁附吸油
- HQY 平衡缓冲/液压锁附吸油
- P44 减压阀.口2附止回阀.口1附测压口
- P45 减压阀.口2附止回阀.口1附测压口
- P4D 减压阀.口2附止回阀.口1附测压口
- P4E 减压阀.口2附止回阀.口1附测压口
- P4F 减压阀.口2附止回阀.口1附测压口
- P4L 减压阀.口2附止回阀.口1附测压口
- P4M 减压阀.口2附止回阀.口1附测压口
- P4N 减压阀.口2附止回阀.口1附测压口
- P4P 减压阀.口2附止回阀.口1附测压口
- P4Q 减压阀.口2附止回阀.口1附测压口
- P4W 减压阀.口2附止回阀.口1附测压口
- P4X 减压阀.口2附止回阀.口1附测压口
- P4Y 减压阀.口2附止回阀.口1附测压口
- ZAC ISO 08: On B with reverse flow check, port 3 external
额外来源 [ + ]
集锦
- Pilot Controlled Directional Cartridges Technical Tips
- Sun Cartridges with EPDM Seals
- Check Valves, Flow Control and Priority Flow Control Valves Technical Tips
- Sun FLeX™系列电磁阀&线圈
- 插孔节省™复合功能阀 简化你的液压方案
- Another Optimized Solution from Sun Hydraulics!
- Sun推出抗腐蚀产品解决方案
- T: 让您的系统更加灵活，让您的未来更加可期！
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Sun’s Cartridge Symbol Library
- Sun Introduces Additional Solenoid-Operated Pilot Valves
技术指导
- Sun插装阀插孔 (551.8 KB)
- 回路简化阀 (623.23 KB)
- 先导控制换向阀 (754.75 KB)
- 单向阀 节流阀 优先节流阀 (553.02 KB)
- Check, Flow Control, and Priority Flow Control Valves (537.44 KB)
技术信息