Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

740系列, 红双扭转/锁紧操作, 手动超控控制组件, D控制

全部展开

技术特性 [ + ]

The dual manual override is a rotary, hand-actuated device for use on Sun's (full flow solenoid valves and FLeX series valves). The hand knob is constructed of a reinforced red plastic for durability, heat resistance, and stability in varying environmental conditions and is suitable for operation with a gloved hand. The override assembly incorporates a sealed-construction design thereby preventing the introduction of debris and other damaging contamination. Once installed on a Sun solenoid valve, the override feature allows the operator to manually shift the de-energized valve. The red D control is available in kit form only and cannot be configured with the cartridge. Please note that valves with the dual manual override are not suitable for load holding applications.

这里集合两种操作方式的“D”控制方式，将允许操作员选择顺时针旋转瞬时移动阀芯或者逆时针旋转将其锁定在固定位置。
这个人工控制装置的机械寿命大致为7000次工作循环。
若要正确操作旋转型的手动超控，很重要的一点是在旋转之前充分抓住旋转帽。

回到首页

技术数据 [ + ]

材料	Red plastic and aluminumRed plastic and aluminum
描述	Dual (Twist/Lock) Operation (Option D)Dual (Twist/Lock) Operation (Option D)
操作扭矩	15 lbf in.15 lbf in.
型号重量	.20 lb0,10 kg