Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

24 VDC 线圈带嵌入式比例放大器, 红外, 电压命令

全部展开

技术特性 [ + ]

这种嵌入式的电子放大器是一款紧凑，小巧的线圈/控制器结合的部件，作用于比例电磁阀。放大器可对线圈提供线性控制电流。顶部的LED指示灯将可以很好地表征放大器工作状态。放大器的初始设定需要经由Sun的放大器设定软件或者手持式编程器实现（HHP）。这里没有机械设定面板和按钮。一旦设定完成，参数将在记忆单元里永久保存。

可以使用Sun的放大器设定软件或者手持式编程器很容易地设置。
LED指示灯显示状态以及输出电流。
标准的DIN 43650-结构 A型接头-4针。
可选的颤振范围0-300Hz. Sun推荐颤振频率140Hz。
匹配最小电流输出，具备短路保护。
5V范围内电位器/手柄控制。
所有的输入和输出限制都是单独可调。
单独可调的上升以及下降时间。
微处理控制下更稳定更可靠的性能。
该线圈电磁力分布均匀，可以任意方向安装且不影响性能。
带有聚酞酸酯光管尼龙外壳由玻璃纤维和聚氨酯胶灌封起。
需要与之配套的电缆线，但是不包括在产品中。
CE认证- 详细请见见CE Testing Results and Explanation, 文件号999-991-260

回到首页

技术数据 [ + ]

供应电压	Equals coil voltage within +/-10%Equals coil voltage within +/-10%
供应电流	I(sol) + 20mAI(sol) + 20mA
输出电流	600 mA600 mA
颤振频率	Off, 80-300 Hz, in 20 Hz incrementsOff, 80-300 Hz, in 20 Hz increments
斜坡时间	0-120.0 s, 0.5 s increments0-120.0 s, 0.5 s increments
参考电压	+5V at 1mA+5V at 1mA
运行温度范围	-4 to 158 °F-20 to 70 °C
Enclosure	Glass filled nylon with Lexan light pipes, polyurethane potting compoundGlass filled nylon with Lexan light pipes, polyurethane potting compound
模拟输入范围	0-10V0-10V
模拟输入阻抗	13 Kilo-ohms13 Kilo-ohms
Card Function	+5V Reference Option+5V Reference Option
电压/频率	24 VDC24 VDC
接头	ISO/DIN 43650, Form A, 4-pinISO/DIN 43650, Form A, 4-pin
接头防护等级	IP65IP65