Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Infrared cable adapter

Expand All

Technical Features [ + ]

Sun's Infrared Cable Adapter provides a convenient interface between Sun's 790 Series Embedded Digital Proportional Valve Amplifier and the Hand Held Programmer or a Windows Based PC. Included with the Cable Adaptor is a USB memory key containing Sun's Amplifier Set Up Software.

The serial Cable Adapter provides a method for connecting the Amplifier to the Hand Held Programmer (Sun p/n 991-700) or a Windows based PC.
The Cable Adapter enables quick, easy setup for the Amplifier.
The Amplifier remains mounted and the Cable Adapter can be connected and disconnected under power.
The Adapter circuit is powered from the HHP or PC and does not require an external power source.

Technical Data [ + ]

Supply Voltage	HHP or PC port poweredHHP or PC port powered
Supply Current	10mA max.10mA max.
Operating Temperature Range	-4 - 140 °F-20 - 60 °C
Cable Length	6 ft2 m

Used With [ + ]

What models can this kit be used with?

7902B12V 12 VDC coil with embedded proportional IR amplifier, voltage command
7902B24A 24 VDC coil with embedded proportional IR amplifier, current command
7902B24V 24 VDC coil with embedded proportional IR amplifier, voltage command
7902C24V 24 VDC coil with embedded proportional IR amplifier, voltage command
7902D24V 24 VDC coil with embedded proportional IR amplifier, voltage command
7904A12V 12 VDC coil with embedded proportional IR amplifier, voltage command
7904A24A 24 VDC coil with embedded proportional IR amplifier, current command
7904A24V 24 VDC coil with embedded proportional IR amplifier, voltage command
7904E12V 12 VDC coil with IR embedded power saver
7904E24V 24 VDC coil with IR embedded power saver

Additional Resources [ + ]

Technical Information

Sun's Floating Style Screw-In Cartridge (1.06 MB)
CE Declaration of Conformity - XMD 12-2017 (133.69 KB)
Data Sheet for Infrared Cable Adapter; 999-991-232 (590.22 KB)

991702 | Electronics » Cables » Cables | Sun Hydraulics

Assembly Build Process

Assembly Build Process

Infrared cable adapter

Footer