Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

12 VDC coil with IR embedded power saver

Expand All

Technical Features [ + ]

The Power Saver is a compact, low profile coil/controller combination for use with switching solenoid valves. The Power Saver controls current to the coil to minimize power consumption. Bright LED indicators on the unit provide an overview of the operating status. Setup is accomplished through Sun's Amplifier Set Up Software or the Hand Held Programmer (HHP). There is no cover to remove and no tiny pots to set. Once configured, the settings are stored in permanent memory within the unit. The Power Saver is intended for use on continuous duty applications (minimum switches between on and off).

Easily configured using Sun's Amplifier Set Up Software or the Hand Held Programmer.
LED indication of Status and Output Current
Adjustable current limited output with short circuit protection
Microprocessor controlled for consistent, reliable performance
Deutsch DT04-6P Connector, IP69K rated
All output limits are independently adjustable.
Glass filled nylon enclosure with Lexan light pipes and polyurethane potting compound
Power cable with mating connector is required and is not included with product.
CE approved - See CE Testing Results and Explanation, document number 999-991-260, for details

Technical Data [ + ]

Supply Voltage	Equals coil voltage within +/-10%Equals coil voltage within +/-10%
Supply Current	I(sol) + 20mAI(sol) + 20mA
Operating Temperature Range	-4 to 158 °F-20 to 70 °C
Analog Input Impedance	13 Kilo-ohms13 Kilo-ohms
Card Function	Power SaverPower Saver
Output Current for 6 seconds (max.)	2000 mA2000 mA
Output Current for holding (max.)	1600 mA1600 mA
Voltage/Frequency	12 VDC12 VDC
Connector	Deutsch DT04-6PDeutsch DT04-6P

Used With [ + ]

What models can this kit be used with?

DAAL
2-way, solenoid-operated directional spool valve - pilot capacity
DAALS
2-way, soft shift, solenoid-operated directional spool valve - pilot capacity
DBAL
3-way, solenoid-operated directional spool valve - pilot capacity
DBALS
3-way, soft shift, solenoid-operated directional spool valve - pilot capacity
DFDA
2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2
DLDA
2-way, solenoid-operated directional spool valve
DLDAS
2-way, soft shift, solenoid-operated directional spool valve
DMDA 3-way, solenoid-operated directional spool valve
DMDAS 3-way, soft shift, solenoid-operated directional spool valve
DNCA 4-way, 2-position, solenoid-operated directional spool valve with closed transition
DNDA 4-way, 2-position, solenoid-operated directional spool valve
DNDAS 4-way, 2-position, soft shift, solenoid-operated directional spool valve
DNDC 4-way, 3-position, solenoid-operated directional spool valve
DNDY 2-position, 6-way, solenoid-operated directional spool valve
DNDYS 2-position, 6-way, soft shift, solenoid-operated directional spool valve
DTCA
2-way, direct-acting, solenoid-operated directional blocking poppet valve with overlap
DTDA
2-way, direct-acting, solenoid-operated directional blocking poppet valve
DWDA
3-way, direct-acting, solenoid-operated directional poppet valve
HDDA 2-way, solenoid-operated directional poppet valve - after check
991700
Hand Held Programmer
991702 Infrared cable adapter
991704 USB infrared cable adapter
991706003 Deutsch DT06-6S cable assembly
991706006 Deutsch DT06-6S cable assembly