Series 3 - T-16A cavity, buna-N, cartridge seal kit
Technical Features [ + ]
- The shelf life for this cartridge seal kit is ten years from date of purchase. This date will be printed on the kit packaging.
Cartridge Installation Data [ + ]
Series | 3 |
Cartridge Thread | M36M36 |
Valve Hex Size | 1 1/4 in.31,8 mm |
Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
Cavity | T-16A |
Used With [ + ]
What models can this kit be used with?
- CNGC Fixed-orifice, non-pressure compensated, flow control valve with reverse flow check
- CNHC Free flow nose to side check valve with bypass orifice
- CXGD Free flow side to nose check valve
- CXHA Free flow nose to side check valve
- CXHHZ Free flow nose to side check valve with position switch
- DFEA2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2
- DFEA8 2-way, poppet directional valve with integral T-8A control cavity - control 1-2
- DFEB2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1
- DFEB8 2-way, poppet directional valve with integral T-8A control cavity - control 2-1
- FCEB Fixed-orifice pressure compensated flow control valve with reverse flow check
- FDEA Fully adjustable pressure compensated flow control valve with reverse flow check
- FLHA Filter
- FPHK Pilot-operated, normally closed, electro-proportional throttle with reverse flow check
- FQGA Fixed-orifice, flow fuse valve
- FXEA Fixed-orifice, pressure compensated flow control valve
- NCFB Fully adjustable needle valve with reverse flow check
- NCFC Fully adjustable needle valve with reverse flow check
- NFEC Fully adjustable needle valve
- NFED Fully adjustable needle valve
- RPIC Pilot-operated, balanced piston relief valve
- RPIC8 Pilot-operated, balanced piston relief main stage with integral T-8A control cavity
- RPID Air-controlled, pilot-operated, balanced piston relief valve
- RPIE Fast-acting, pilot-operated, balanced piston relief valve
- RQIB Kick-down, pilot-operated, balanced piston relief valve
- XICA All ports blocked cavity plug
- XIOA All ports open cavity plug
- XIOAF T-16A cavity to T-10A cavity converter
- XIOAG T-16A cavity to T-13A cavity converter
- XIOC T-16A cavity to T-5A cavity converter
Notes [ + ]
- Install back-up rings and O-rings as shown in views.
- When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
- When installing cartridge - be sure to torque to recommended value.
Additional Resources [ + ]
Technical Information