Ventear-para-abrir, spring-biased closed, disco desequilibrado elemento lógico con fuente de pilotaje del puerto 1

These unbalanced, vent-to-open logic valves are 2-way switching elements that are spring-biased closed and have port 1 as a pilot source. With port 3 blocked, the valve will remain in the closed position in the 1 to 2 direction and will function as a check valve from 2 to 1. With port 3 vented, the valve will open provided there is sufficient pressure to overcome the spring force. The force generated at port 3, plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

• These valves have positive seals between port 2 and the pilot area.
• These valves open quickly when vented. Time to close is difficult to predict as it is dependent on the rate of flow and the pressure drop created as it closes.
• Because these valves are unbalanced, operation is pressure dependent. Opening and closing of the poppet are functions of the force balances on three areas: Port 1 = 100%, Port 2 = 80%, and the Pilot Area = 180%.
• These valves are pressure responsive at all ports, therefore it is essential to consider all aspects of system operation through a complete cycle. Pressure changes at any one port may cause a valve to switch from a closed to an open position, or vice versa. All possible pressure changes in the complete circuit must be considered to assure a safe, functional system design.
• All ports will accept 5000 psi (350 bar).
• Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.
• Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

• LOHA8Ventear-para-abrir, spring-biased closed, disco desequilibrado elemento lógico con fuente de pilotaje del puerto 1 y cavidad de control T-8A integral

• QuickDesign con SmartConnect Ofrece una Herramienta para Construir Esquemáticos
• Take the Guesswork Out of Logic Circuits
• Reduce el impacto de descompresión y sus costos de operación
• Pilot Controlled Directional Cartridges Technical Tips
• Válvulas CavitySaver de multifunción ofrecen varias soluciones en una
• Sun Expands Corrosion-Resistant Solutions
• Válvulas y bobinas a solenoides de la serie Sun FLeX
• Logic Element Cartridges Technical Tips
• Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
• Sun Offers Zinc-Nickel Plating for Corrosion Resistance
• More Options for Logic Elements with Position-Indicating Switch
• Nuevas válvulas direccionales accionadas por solenoide de la serie FLeX
• Sun Cartridges with EPDM Seals

• Manufacturing Sun Cartridge Cavities (522.27 KB)

• Cavity Information (S-171) and Tooling
• Fluid Recommendations: Oil Viscosity, Cleanliness & Temperature
• Sun's Floating Style Screw-In Cartridge (1.06 MB)
• Units of Measure, Settings, and Conversions
• Sun Model Code Explanation; 999-901-334 (343.9 KB)
• Performance Data
• Cartridges: Materials of Construction