Series 1 - T-10A cavity and T-13A cavity, Polyurethane cartridge seal kit
![990010002 : Series 1 - T-10A cavity and T-13A cavity, Polyurethane cartridge seal kit](https://cmsimages.sunhydraulics.com/skg_t10a3_t13a3.gif)
Technical Features [ + ]
Sun offers replacement seal kits for all cartridge models. These kits include all of the external seals on the cartridge along with installation instructions. Seal kits are available in Buna-N and Viton for all models, along with EPDM and polyurethane for many models. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
- The shelf life for this cartridge seal kit is ten years from date of purchase. This date will be printed on the kit packaging.
- Polyurethane seals have a higher tensile strength, are more abrasion/extrusion resistant, and are well suited for high cycle and high pressure applications.
- The Series 1, two port cavity comes in two versions: the T-10A and the T-13A. The T-10A cavity is typically used in relief applications which require larger port areas, hence a deeper cavity. The T-13A cavity is typically used in flow control applications and utilizes a smaller port area. Since both cavities are Series 1, two port, they share common seal kits, but exclude the possibility of cartridge interchangeability between the two functions.
Technical Data [ + ]
Series | 1 |
Cartridge Thread | M20M20 |
Valve Hex Size | 7/8 in.22,2 mm |
Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
Cavity | T-10A |
Cartridge Seal Installation Variations [ + ]
Cartridge Assignments | Models: CDAC, CNDB, CNDC, CSAC, CXDA, CXDB, CXDF, FLDA, Views: A,DModels: CDAC, CNDB, CNDC, CSAC, CXDA, CXDB, CXDF, FLDA, Views: A,D |
Cartridge Assignments | Models: NFCC, NFCD, Views: A,CModels: NFCC, NFCD, Views: A,C |
Used With [ + ]
What models can this kit be used with?
- CDAA Back-to-back check/shuttle valve with signal external
- CDAC Back-to-back check/shuttle valve with signal at port 2
- CNCC Fixed-orifice, non-pressure compensated, flow control valve with reverse flow check
- CNDC Free flow nose to side check valve with bypass orifice
- CSAA Single ball shuttle valve with signal external
- CSAC Single ball shuttle valve with signal at port 2
- CXCD Free flow side to nose check valve
- CXDA Free flow nose to side check valve
- FCCB Fixed-orifice pressure compensated flow control valve with reverse flow check
- FDBA Fully adjustable pressure compensated flow control valve with reverse flow check
- FLDA Filter
- FQCA Fixed-orifice, flow fuse valve
- FXCA Fixed-orifice, pressure compensated flow control valve
- NCCB Fully adjustable needle valve with reverse flow check
- NCCC Fully adjustable needle valve with reverse flow check
- NCCD Fully adjustable needle valve with reverse flow check
- NFCC Fully adjustable needle valve
- NFCD Fully adjustable needle valve
- RBAC Direct-acting relief valve - pilot capacity
- RPEC Pilot-operated, balanced piston relief valve
- RPEC8 Pilot-operated, balanced piston relief main stage with integral T-8A control cavity
- RPEE Fast-acting, pilot-operated, balanced piston relief valve
- RQEB Kick-down, pilot-operated, balanced piston relief valve
- RVCK FLeX Series 2-stage, solenoid-operated adjustable relief valve, normally vented
- RVCL FLeX Series 2-stage, solenoid-operated adjustable relief valve, energize to vent
- RVCM FLeX Series 2-stage, solenoid-operated adjustable relief valve, energize to block
- RVCN FLeX Series 2-stage, solenoid-operated adjustable relief valve, normally blocked
- SXCB Atmospherically referenced, direct-acting sequence valve without reverse flow check
- XFAA T-10A cavity to T-8A cavity converter
- XFAB T-10A cavity to T-8A cavity converter with filter screen
- XFCA All ports blocked cavity plug
- XFCAE Port 1 to external port, port 2 blocked cavity plug
- XFOA All ports open cavity plug
- XGAA T-13A cavity to T-8A cavity converter
- XGCA All ports blocked cavity plug
- XGCAE Port 1 to external port, port 2 blocked cavity plug
Notes [ + ]
- Install back-up rings and O-rings as shown in views.
- See installation variations for models associated with alternative installation views.
- When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
- When installing cartridge - be sure to torque to recommended value.
Additional Resources [ + ]
Technical Information