747 Series, 24 VDC hazardous location bobina con 180 Deg M20 x 1.5 conector - ATEX, IECEx, CSA
Technical Features [ + ]
Model 747 Series hazardous location coils are designed for Sun's FLeX Series switching and proportional solenoid valves and for newer Sun valves that use the 16-mm actuator tubes. All models include ATEX, IECEx, and NEC, CEC/CSA certifications.
- This coil is CE compliant.
- RoHS compliant. Restricted materials less than 0.1% total by weight.
- All hazardous location coils are certified for gas and dust environments (T4 compliant for gas and T135° C for dust).
- IP66 rating (with suitable certified cable entry or conduit per IEC 60529).
- Includes vibration-resistant push-to-connect terminal block. Power cable with mating connector is required and not included with this product.
- The external steel shell is zinc-nickel plated (1000-hour salt fog protection).
- Fin-free design prevents build up of grease, dust and debris.
- The coil is magnetically symmetrical and can be mounted in either direction on the solenoid tube without affecting performance.
- A TVS surge suppression diode is built in and offers a 48-Vdc breakdown voltage.
- For optimum performance when used on a proportional valve, an amplifier with current feedback and adjustable dither should be used. Dither should be adjustable between 80-250 Hz.
- See "Related Information" for Certification information, or click Full Data Sheet above to download complete details.
Technical Data [ + ]
| Operating Temperature Range | -40 to 158 °F-40 to 70 °C |
| Diametric Coil Clearance Requirement | 2.36 in.59,4 mm |
| Fluid Temperature Through Valve (Maximum) | 158 °F70 °C |
| Corrosion Resistance (ASTM B117, ISO 9227 5% saline) | 1000 hours salt fog (zinc-nickel)1000 hours salt fog (zinc-nickel) |
| Power Consumption at 68°F (20°C) cold - at rated voltage | 30 watts30 watts |
| Voltage/Frequency | 24 VDC (-15%/+0%)24 VDC (-15%/+0%) |
| Duty Cycle Rating | 100 %100 % |
| conector | M20 x 1.5 female connectorM20 x 1.5 female connector |
| Solenoid Tube Diameter | .63 in.16 mm |
| Coil Nut Torque | 4.5 lbf in.0,5 Nm |
| Model Weight | 1.80 lb0,80 kg |
| IP Rating | IP66 (with suitable cable entry/conduit)IP66 (with suitable cable entry/conduit) |
Used With [ + ]
What models can this kit be used with?
- DBAF 3-vías direccional, operada por solenoide carrete válvula - capacidad de pilotaje (740 Series)
- DBAFS 3-vías, cambio suave , direccional, operada por solenoide carrete válvula - capacidad de pilotaje (740 Series)
- DFBD FLeX Series 2-vías , 2-stage, direccional, operada por solenoide disco válvula con anti-retorno de caudal inverso - caudal 2-1, 3000 psi (210 bar)
- DFBE FLeX Series 2-vías , 2-stage, direccional, operada por solenoide disco válvula con anti-retorno de caudal inverso - caudal 2-1, 3000 psi (210 bar)
- DFBF FLeX Series 2-vías , 2-stage, direccional, operada por solenoide disco válvula con anti-retorno de caudal inverso - caudal 2-1
- DFBG FLeX Series 2-vías , 2-stage, direccional, operada por solenoide disco válvula con anti-retorno de caudal inverso - caudal 2-1
- DFCI 2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 1-2 (740 Series)
- DFCJ 2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 2-1 (740 Series)
- DFDI 2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 1-2 (740 Series)
- DFDJ 2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 2-1 (740 Series)
- DFEI 2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 1-2 (740 Series)
- DFEJ 2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 2-1 (740 Series)
- DFFI 2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 1-2 (740 Series)
- DFFJ 2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 2-1 (740 Series)
- DLDF 2-vías , direccional, operada por solenoide carrete válvula (740 Series)
- DLDFS 2-vías , cambio suave , direccional, operada por solenoide carrete válvula (740 Series)
- DMBD FLeX Series 3-vías, direccional, operada por solenoide carrete válvula - 3000 psi (210 bar)
- DMBF FLeX Series 3-vías, direccional, operada por solenoide carrete válvula
- DNBD FLeX Series 4-vías, 2-posiciones , direccional, operada por solenoide carrete válvula - 3000 psi (210 bar)
- DNBF FLeX Series 4-vías, 2-posiciones , direccional, operada por solenoide carrete válvula
- DTAF FLeX Series 2-vías , acción-directa , direccional, operada por solenoide blocking disco válvula
- DTAFS FLeX Series 2-vías , cambio suave , direccional, operada por solenoide disco válvula - capacidad de pilotaje
- DTBF FLeX Series 2-vías , acción-directa , direccional, operada por solenoide blocking disco válvula
- DTCF 2-vías , acción-directa , direccional, operada por solenoide blocking disco válvula con superponer (740 Series)
- DTDF 2-vías , acción-directa , direccional, operada por solenoide blocking disco válvula (740 Series)
- DTDFS 2-vías , acción-directa , cambio suave , direccional, operada por solenoide blocking disco válvula (740 Series)
- DWBF FLeX Series 3-vías, acción-directa , direccional, operada por solenoide blocking disco válvula
- DWDF 3-vías, acción-directa , direccional, operada por solenoide disco válvula (740 Series)
- FDEP 2-vías , acción-directa electro-proporcional , compensado por presión control de caudal válvula con anti-retorno de caudal inverso
- FMDF Electro-proporcional 3-vías control de caudal válvula , alimentación regulada (740 Series)
- FMDG Electro-proporcional 3-vías control de caudal válvula , alimentación regulada (740 Series)
- FPBF FLeX Series pilot-operated, normalmente cerrado, electro-proporcional estrangulación - caudal 2-1
- FPBG FLeX Series pilot-operated, normalmente cerrado, electro-proporcional estrangulación con anti-retorno de caudal inverso - caudal 2-1
- FPBI FLeX Series pilot-operated, normalmente abierto, electro-proporcional estrangulación - caudal 2-1
- FPBJ FLeX Series pilot-operated, normalmente abierto, electro-proporcional estrangulación con anti-retorno de caudal inverso - caudal 2-1
- FPBU FLeX Series electro-proporcional , blocking disco estrangulación - normalmente cerrado
- FREP FLeX Series 3-vías, acción-directa , electro-proporcional , desvió /restrictivo, prioritario control de caudal válvula
- PRDF Electro-proporcional , acción-directa , reductor/alivio de presión válvula con transición abierta (740 Series)
- PRDG Electro-proporcional , acción-directa , reductor/alivio de presión válvula (740 Series)
- RPEI Electro-proporcional alivio válvula - ajuste a alta presión sin comando
- RVCK FLeX Series 2-stage, solenoid-operated ajustable alivio válvula , normally vented
- RVCL FLeX Series 2-stage, solenoid-operated ajustable alivio válvula , energize to vent
- RVCM FLeX Series 2-stage, solenoid-operated ajustable alivio válvula , energize to block
- RVCN FLeX Series 2-stage, solenoid-operated ajustable alivio válvula , normally blocked
- 991711300 XMD Series, 12-pin Deutsch prototype , single-output - 3M
- 991711600 XMD Series, 12-pin Deutsch prototype , single-output - 6M
- 991712300 XMD Series, 12-pin Deutsch prototype , double-output - 3M
- 991712600 XMD Series, 12-pin Deutsch prototype , double-output - 6M
- XMD-01 Configurable single-output driver used con proporcional y solenoid-operated switching valves
- XMD-02 Configurable double-output driver used con proporcional y solenoid-operated switching valves
Notes [ + ]
- 1. Mount coil onto spool (tube) body.
- 2. A cable entry hole is provided to accommodate any suitable certified flameproof cable entry device. Cable entry temperature may exceed 70° C (158° F).
- 3. Remove terminal box cover and connect electrical supply and earth to terminal block. Conductors according to Note 4. Note: coil is polarity insensitive. The center terminal is the internal ground. Replace cover and secure with the four screws (M4 x ,7). Torque to min 1.92
- 4. Connect external ground. North American applications: external earth (ground) connections. Use where local codes or authorities permit or require external earth (ground) connections. Torque to 1.25 ft-lbs (1.7 N-m).
- 5. When installing with multiple coils, the coils must be spaced a minimum of 0.875" (22.23 mm) apart to ensure adequate heat dissipation.
- For installation in above-ground electrical systems in explosive atmospheres, procedures for all applicable codes must be observed. All work must be carried out by an electrician with adequate qualifications for hazardous locations.
- Sun's 747 Series hazardous location coil requires more clearance than the FLeX 740 series coil. Sun manifolds with more than one cavity may not allow enough clearance for these coils. An additional 2.00” (50,8 mm) beyond the valve extension is needed for coil installation
Additional Resources [ + ]
Realces
- Válvulas y bobinas a solenoides de la serie Sun FLeX
- Nuestra familia FLeX de válvulas accionadas por solenoide amplía sus opciones
- ¿Por qué esperar? Obtenga las válvulas FLeX de Sun y nuestros nuevos controladores XMD cuando los desee.
Technical Information
- Environmental Test Specification for Electrical and Electronic Co (254.61 KB)
- Sun's Floating Style Screw-In Cartridge (1.06 MB)
- 747 Series Hazardous Location Coils - IECEx Certificate of Confor (285.26 KB)
- 747 Series Hazardous Location Coils - ATEX Certificate (976.94 KB)
- CE Declaration of Conformity - XMD 12-2017 (133.69 KB)
- 747 Series Hazardous Location Coils - CSA Certificate of Complian (106.22 KB)