Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

XMD Series, 6M, 12-pin Deutsch prototype cable, single-output with 2-pin Deutsch lead

Expand All

Technical Features [ + ]

This single-output, 12 Pin Deutsch cable assembly is for use with Sun's XMD-01 electro-hydraulic driver. It comes equipped with a 2-pin Deutsch lead that connects directly to the FLeX or 770 Series Deutsch coils when combined with the coil clip accessory.

Workmanship performed to IPC-A-620 Class 2
Stranded Black UL 3289CSA 18 Gauge Wire
Rated for 150°C (302°F)
Insulation type XLPE
Rated for 750 VDC and 600 VAC

Technical Data [ + ]

Length	6 m6 m
Connector	Molex 93445-6212, Keying Option A, GreyMolex 93445-6212, Keying Option A, Grey
Lead Connector	Molex 93445-1101, BlackMolex 93445-1101, Black
Lead Length	0,3 m0,3 m

Used With [ + ]

What models can this kit be used with?

740912 740 Series, 12 VDC, high-power coil with Deutsch DT04-2P connector without TVS Diode
740912D 740 Series, 12 VDC, high-power coil with Deutsch DT04-2P connector with TVS Diode
740912L 740 Series, 12 VDC, low-power coil with Deutsch DT04-2P connector without TVS Diode
740912LD 740 Series, 12 VDC, low-power coil with Deutsch DT04-2P connector with TVS Diode
740914 740 Series, 14 VDC, high-power coil with Deutsch DT04-2P connector without TVS Diode
740914D 740 Series, 14 VDC, high-power coil with Deutsch DT04-2P connector with TVS Diode
740914L 740 Series, 14 VDC, low-power coil with Deutsch DT04-2P connector without TVS Diode
740914LD 740 Series, 14 VDC, low-power coil with Deutsch DT04-2P connector with TVS Diode
740924 740 Series, 24 VDC, high-power coil with Deutsch DT04-2P connector without TVS Diode
740924D 740 Series, 24 VDC, high-power coil with Deutsch DT04-2P connector with TVS Diode
740924L 740 Series, 24 VDC, low-power coil with Deutsch DT04-2P connector without TVS Diode
740924LD 740 Series, 24 VDC, low-power coil with Deutsch DT04-2P connector with TVS Diode
740928 740 Series, 28 VDC, high-power coil with Deutsch DT04-2P connector without TVS Diode
740928D 740 Series, 28 VDC, high-power coil with Deutsch DT04-2P connector with TVS Diode
740928L 740 Series, 28 VDC, low-power coil with Deutsch DT04-2P connector without TVS Diode
740928LD 740 Series, 28 VDC, low-power coil with Deutsch DT04-2P connector with TVS Diode
770912 12 VDC coil with Deutsch DT04-2P connector with TVS Diode
770914 14 VDC coil with Deutsch DT04-2P connector with TVS Diode
770914N 14 VDC coil with Deutsch DT04-2P connector without TVS Diode
770924 24 VDC coil with Deutsch DT04-2P connector with TVS Diode
770924N 24 VDC coil with Deutsch DT04-2P connector without TVS Diode
770928 28 VDC coil with Deutsch DT04-2P connector with TVS Diode
991713030 XMD Series, 2-pin Deutsch prototype cable - 30CM
991713060 XMD Series, 2-pin Deutsch prototype cable - 60CM
991740001 XMD Series, high-power coil clip kit
991740002 XMD Series, low-power coil clip kit
XMD-01 Configurable single-output driver used with proportional and solenoid-operated switching valves
XMD-02 Configurable double-output driver used with proportional and solenoid-operated switching valves