740 Series, 24 VDC, low-power coil with Deutsch DT04-2P connector with TVS Diode

• Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
• Power cable with mating connector is required and is not included with the coil.
• The coil is magnetically symmetrical and can be mounted on the solenoid tube in either direction for best cable access without affecting performance.
• Coil is fully RoHS compliant. Restricted materials less than 0.1% total by weight.
• The external steel shell is zinc-nickel plated and provides 1000-hour salt fog protection.
• Coil includes a transient voltage suppression (TVS) diode.
• For optimum proportional performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
• IP rating for this coil is IP69K.
• This coil is CE compliant. It meets the requirements of the Low Voltage Directive (2006/95/EC) and EN 60204-1:2006.

What models can this kit be used with?

• DBAF 3-way solenoid-operated directional spool valve - pilot capacity (740 Series)
• DBAFS 3-way, soft shift, solenoid-operated directional spool valve - pilot capacity (740 Series)
• DFBD FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1, 3000 psi (210 bar)
• DFBE FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1, 3000 psi (210 bar)
• DMBD FLeX Series 3-way, solenoid-operated directional spool valve - 3000 psi (210 bar)
• DNBD FLeX Series 4-way, 2-position, solenoid-operated directional spool valve - 3000 psi (210 bar)
• DTAF FLeX Series 2-way, direct-acting, solenoid-operated directional blocking poppet valve
• DTAFS FLeX Series 2-way, soft shift, solenoid-operated directional poppet valve - pilot capacity
• DTBF FLeX Series 2-way, direct-acting, solenoid-operated directional blocking poppet valve
• FPBD FLeX Series pilot-operated, normally closed, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar)
• FPBE FLeX Series pilot-operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar)
• FPBM FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar)
• FPBN FLeX Series pilot-operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar)
• RPEI Electro-proportional relief valve - high pressure setting with no command
• 991711300 XMD Series, 12-pin Deutsch prototype cable, single-output - 3M
• 991711600 XMD Series, 12-pin Deutsch prototype cable, single-output - 6M
• 991712300 XMD Series, 12-pin Deutsch prototype cable, double-output - 3M
• 991712600 XMD Series, 12-pin Deutsch prototype cable, double-output - 6M
• 991713030 XMD Series, 2-pin Deutsch prototype cable - 30CM
• 991713060 XMD Series, 2-pin Deutsch prototype cable - 60CM
• 991717 FLeX Series, adapter cable - 2-pin Deutsch to Metri-Pack, Series 150-2M
• 991718 FLeX Series, adapter cable - 2-pin Deutsch to AMP Junior Timer
• 991719 FLeX Series, adapter cable - 2-pin Deutsch to twin leads
• 991723001 2-pin Deutsch connector kit (gray)
• 991723002 2-pin Deutsch connector kit (black)
• 991740002 XMD Series, low-power coil clip kit
• XMD-01 Configurable single-output driver used with proportional and solenoid-operated switching valves
• XMD-02 Configurable double-output driver used with proportional and solenoid-operated switching valves

• Sun's New FLeX Series Solenoid Valves & Coils
• Our FLeX family of solenoid-operated valves is expanding

• 740 Series Coils - Derating Tables (56.42 KB)
• Environmental Test Specification for Electrical and Electronic Co (254.61 KB)
• Sun's Floating Style Screw-In Cartridge (1.06 MB)
• XMD Coil Clip Installation Guide (749.23 KB)
• CE Declaration of Conformity - XMD 12-2017 (133.69 KB)