24 VDC coil with ISO/DIN 43650, Form A connector with TVS Diode

770224 : 24 VDC coil with ISO/DIN 43650, Form A connector with TVS Diode
Technical Features [ + ]
  • Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
  • A TVS surge suppression diode is built into DC coils. Nominal breakdown voltage: 68V. Model code 1.5 KE68CA Steady state power dissipation @ 75°C is 6.5 W and peak pulse dissipation is 1500 W for 1 ms, nonrepetitive.
  • Power cable with mating connector is required and is not included with product.
  • The coil is magnetically symmetrical and can be mounted in either direction on the solenoid tube without affecting performance.
  • For optimum proportional performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
  • This coil is CE compliant. It meets the requirements of the Low Voltage Directive (2006/95/EC) and EN 60204-1:2006.
  • IP rating is dependent on the coil connector and the mating connector used.
  • RoHS compliant. Restricted materials less than 0.1% total by weight.
  • The external steel shell is plated with clear zinc trivalent.
Back to Top
Technical Data [ + ]
Maximum Coil Temperature at 68ºF (20ºC) Ambient 218ºF (105ºC)218ºF (105ºC)
Arc Suppression (TVS) IncludedIncluded
Power Consumption (cold) - at rated voltage 22 watts22 watts
Maximum Ambient Temperature 122 °F50 °C
Voltage/Frequency 24 VDC24 VDC
Operating Voltage Range +/- 10% nominal+/- 10% nominal
Duty Cycle Rating 100 %100 %
Connector ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pinISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin
Connector Environment Rating IP65/IP67IP65/IP67
Solenoid Tube Diameter .75 in.19 mm
Coil Nut Torque 4.5 lbf in.0,5 Nm
Model Weight 8.2 oz.8.2 oz.
Back to Top
Proportional Performance Data [ + ]
Maximum Current 590 mA590 mA
Nominal Coil Resistance at 122ºF (50ºC) Stabilized 37.2 ±5% ohms37.2 ±5% ohms
Nominal Coil Resistance at 68ºF (20ºC) Cold 26.2 ±5% ohms26.2 ±5% ohms
Back to Top
Used With [ + ]

What models can this kit be used with?

  • DMDA 3-way, solenoid-operated directional spool valve
  • DMDAS 3-way, soft shift, solenoid-operated directional spool valve
  • DNCA 4-way, 2-position, solenoid-operated directional spool valve with closed transition
  • DNDA 4-way, 2-position, solenoid-operated directional spool valve
  • DNDAS 4-way, 2-position, soft shift, solenoid-operated directional spool valve
  • DNDC 4-way, 3-position, solenoid-operated directional spool valve
  • DNDY 2-position, 6-way, solenoid-operated directional spool valve
  • DNDYS 2-position, 6-way, soft shift, solenoid-operated directional spool valve
  • FMDA Electro-proportional 3-way flow control valve, meter in
  • FMDB Electro-proportional 3-way flow control valve, meter in
  • FPCC Electro-proportional flow control valve - normally closed
  • FPCH Electro-proportional flow control valve - normally open
  • FPFK Pilot-operated, normally closed, electro-proportional throttle with reverse flow check
  • FPHK Pilot-operated, normally closed, electro-proportional throttle with reverse flow check
  • HDDA 2-way, solenoid-operated directional poppet valve - after check
  • PRDM Electro-proportional, direct-acting, pressure reducing/relieving valve with open transition - high pressure setting with no command
  • PRDN Electro-proportional, direct-acting, pressure reducing/relieving valve, high pressure setting with no command
  • PSDL Electro-proportional, direct-acting, pressure reducing/relieving valve with open transition and drain to port 4
  • PSDP Electro-proportional, direct-acting, pressure reducing/relieving valve with drain to port 4
  • RBAN Electro-proportional relief valve - pilot capacity, high pressure setting with no command
  • RBAP Electro-proportional relief valve - pilot capacity
Back to Top
Additional Resources [ + ]
Highlights
Technical Information
Back to Top