Ventear-para-abrir, spring-biased closed, disco desequilibrado elemento lógico con fuente de pilotaje del puerto 1 o 2 y cavidad de control T-8A integral

This valve is an unbalanced, vent-to-open 2-way logic switching element with an integral pilot control cavity. It is spring biased closed and incorporates an integral shuttle so that the higher of pressures at either port 1 or port 2 can be used as a pilot source. With a pilot 2-way valve in the closed position installed in the T-8A cavity, the logic element will remain in the closed position. With the pilot valve open, the logic element will open providing there is a sufficient combination of pressures to overcome the spring force. The force generated at port 3, plus the spring force, must be greater than the sum of the forces acting at port 1 and port 2 for the valve to remain closed. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

• These valves have positive seals between port 2 and the pilot area.
• NOTE: With the -8 control option, the main stage valve should first be installed to the correct torque value. The T-8A pilot control valve should then be installed into the main stage valve to its required torque value.
• The -8 control option allows the pilot control valve to be incorporated directly into the end of the logic cartridge via the T-8A cavity. These pilot control cartridges are sold separately and include electro-proportional, solenoid, air pilot, and hydraulic pilot operation. See Pilot Control Cartridges.
• These valves open quickly when vented. Time to close is difficult to predict as it is dependent on the rate of flow and the pressure drop created as it closes.
• Because these valves are unbalanced, operation is pressure dependent. Opening and closing of the poppet are functions of the force balances on three areas: Port 1 = 100%, Port 2 = 80%, and the Pilot Area = 180%.
• These valves are pressure responsive at all ports, therefore it is essential to consider all aspects of system operation through a complete cycle. Pressure changes at any one port may cause a valve to switch from a closed to an open position, or vice versa. All possible pressure changes in the complete circuit must be considered to assure a safe, functional system design.
• All ports will accept 5000 psi (350 bar).
• Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

• LOJDVentear-para-abrir, spring-biased closed, disco desequilibrado elemento lógico con fuente de pilotaje del puerto 1 o 2

• Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled at point of use.

• Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
• Sun Offers Zinc-Nickel Plating for Corrosion Resistance
• More Options for Logic Elements with Position-Indicating Switch
• Nuevas válvulas direccionales accionadas por solenoide de la serie FLeX
• Sun Cartridges with EPDM Seals
• QuickDesign con SmartConnect Ofrece una Herramienta para Construir Esquemáticos
• Take the Guesswork Out of Logic Circuits
• Reduce el impacto de descompresión y sus costos de operación
• Pilot Controlled Directional Cartridges Technical Tips
• Válvulas CavitySaver de multifunción ofrecen varias soluciones en una
• Sun Expands Corrosion-Resistant Solutions
• Válvulas y bobinas a solenoides de la serie Sun FLeX
• Logic Element Cartridges Technical Tips

• Manufacturing Sun Cartridge Cavities (522.27 KB)

• Units of Measure, Settings, and Conversions
• Sun Model Code Explanation; 999-901-334 (343.9 KB)
• Performance Data
• Cartridges: Materials of Construction
• Cavity Information (S-171) and Tooling
• Fluid Recommendations: Oil Viscosity, Cleanliness & Temperature
• Sun's Floating Style Screw-In Cartridge (1.06 MB)