Model: FTFAXCN
2-vías , pilot-shifted, doble trayectoria, proporcional estrangulación
Capacidad: 50 gpm200 L/min. |
Cavidad: T-53AD
Symbols for FTFA
Technical Features [ + ]
This valve is a 2-way, 2-position proportional throttle. Ports 2 and 3 are normally closed. Pilot pressure at port 1 opposes the spring and creates a variable metering orifice between port 2 and 3 that is proportional to the pressure at 1. The force balance of the flow forces, spring and pilot pressure results in a degree of partial self-compensation as the load pressure changes.
Pressure at port 4 directly opposes pressure at port 1.
The valve uses a dual-path design. Ports 2 and 3 incorporate a double-port area.
- These valves may be pressure compensated by an external, modulating, logic element. Use LR_C-XHN for a bypass circuit or LP_C-XHN for a restrictive circuit.
- The valve provides a degree of self-compensation and may be used as a flow control. To increase the accuracy of flow control, an external, modulating, logic element can be used to maintain a constant flow over a wider range of flows and pressures. See performance curves for additional information.
- The optional L control is a stroke adjustment that limits maximum flow.
- Ports 1 and 4 should be limited to 500 psi (35 bar).
- Pressure at port 4 directly opposes pressure at port 1.
- Accurate pressure compensated control requires that a constant pressure differential be maintained across the valve.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Technical Data [ + ]
Notar: Los datos pueden variar según la configuración . Consulte la sección de CONFIGURATION
| cavidad | T-53AD |
| Series | 3 |
| Capacity | 50 gpm200 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Pilot Pressure Required to Shift Valve | 50 - 120 psi3,5 - 8 bar |
| Pilot Pressure Required for Full Shift at Rated Flow | 290 - 340 psi20 - 23 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@1000 psi160 cc/min.@70 bar |
| Pilot Volume Displacement | .10 in³1,6 cc |
| Adjustment - No. of CCW Turns from Fully Closed to Fully Open | 55 |
| Hysteresis | 35 %35 % |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | 3.10 lb1,40 kg |
| Seal kit - Cartridge | Buna: 990053007 |
| Seal kit - Cartridge | Viton: 990053006 |
Performance Curves [ + ]
FAQs [ + ]
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
Related Models [ + ]
- FTFAZ2-vías , pilot-shifted, doble trayectoria, proporcional estrangulación con indicador de posición
Notes [ + ]
- When installed in Sun's standard T-53A line mount manifold, plug unused ports and expect higher pressure drops.
Additional Resources [ + ]
Realces
- Sun Expands Corrosion-Resistant Solutions
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Válvulas y bobinas a solenoides de la serie Sun FLeX
- Sun Cartridges with EPDM Seals
- High Capacity Electro-Proportional Throttle Valve
- QuickDesign con SmartConnect Ofrece una Herramienta para Construir Esquemáticos
Technical Tips
- Manufacturing Sun Cartridge Cavities (522.27 KB)
Technical Information