Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

3-vías, acción-directa , balanceado carrete, direccional, operada por solenoide válvula , 3000 psi (210 bar) - common cavity

Capacidad: 7 gpm28 L/min. | Cavidad: SC-10-03

Expand All

Technical Features [ + ]

Technical Data [ + ]

Performance Curves [ + ]

FAQs [ + ]

Additional Resources [ + ]

Coil Information [ + ]

Modelo

reset to default

DMUTXHN

X-Control, H-Spool

Configuration

Where To Buy

Assembly Build Process

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

Creer Un Ensemble Corps Cartouche

Trouver Des Blocs Compatibles

cavidad	SC-10-03
Series	1C
Capacity	7 gpm28 L/min.
Maximum Operating Pressure	3000 psi210 bar
Typical Valve Leakage at 110 SUS (24cSt)	2.4 in³/min.@3000 psi39 cc/min.@210 bar
Response Time - Typical	50 ms50 ms
Switching Frequency	15,000 max. cycles/hr15,000 max. cycles/hr
Solenoid Tube Diameter	.50 in.12,7 mm
Valve Hex Size	25 mm25 mm
Coil Nut Torque	3.5 - 3.9 lbf ft4,8 - 5,3 Nm
Valve Installation Torque	24 - 28 lbf ft32,5 - 37,9 Nm
Model Weight	0.24 lb.0.11 kg.

DMUT | Cartuchos » Directional » 3-vías | Sun Hydraulics

Assembly Build Process

Assembly Build Process

LoadMatch™ ROI Calculator

3-vías, acción-directa , balanceado carrete, direccional, operada por solenoide válvula , 3000 psi (210 bar) - common cavity

Assembly Build Process

Footer