T-23A cavity to T-21A cavity or T-22A cavity converter
Capacity: |
Cavity: T-23A
Technical Features [ + ]
Sun offers a selection of cavity adaptors used to convert one cavity to another. Depending on the configuration, this cavity adaptor converts a Sun T-23A cavity to either a Sun T-21A or T-22A cavity.
Technical Data [ + ]
Note: Data may vary by configuration. See CONFIGURATION section.
Cavity | T-23A |
Series | 3 |
Maximum Operating Pressure | 5000 psi350 bar |
Valve Hex Size | 1 7/8 in.47,6 mm |
Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
Seal kit - Cartridge | Buna: 990023007 |
Seal kit - Cartridge | Polyurethane: 990023002 |
Seal kit - Cartridge | Viton: 990023006 |
FAQs [ + ]
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
Additional Resources [ + ]
Highlights
- Sun Cartridges with EPDM Seals
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Sun's New FLeX Series Solenoid Valves & Coils
- Sun Expands Corrosion-Resistant Solutions
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
Technical Tips
- Manufacturing Sun Cartridge Cavities (522.27 KB)
Technical Information