Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Handknob with locknob control kit

Expand All

Technical Features [ + ]

Service kit used to convert Sun's L or K adjustment to an aluminum handknob adjustment. This is available in kit form only and cannot be configured as a cartridge control option.

Technical Data [ + ]

Cartridge Series	1, 2, 3, 4 (except Counterbalance Valves)1, 2, 3, 4 (except Counterbalance Valves)
For Cartridge Models	All Models with an L adjustment control (Except Series 0 and counterbalance)All Models with an L adjustment control (Except Series 0 and counterbalance)
Material	6061-T6 Aluminum6061-T6 Aluminum

Notes [ + ]

Use this kit to adapt all L controls to K controls (except Series 0 and counterbalance cartridges).
Remove the existing stop ring from the adjust screw.
Thread the lockknob onto the adjustment screw.
Thread the handknob assembly onto the end of the adjustment screw until it bottoms out.
Install the set screw into the handknob's threaded hole ensuring that the nylon tip digs into the valve's adjust screw.

Additional Resources [ + ]

Highlights

Sun’s Maximum Setting Limiter

Technical Information

Sun's Floating Style Screw-In Cartridge (1.06 MB)

991011 | Accessories » Cartridge Control Options | Sun Hydraulics

Assembly Build Process

Assembly Build Process

Handknob with locknob control kit

Footer