Series P - T-9A cavity, buna-N, cartridge seal kit
![990109007 : Series P - T-9A cavity, buna-N, cartridge seal kit](https://cmsimages.sunhydraulics.com/skg_t9a3.gif)
Technical Features [ + ]
Sun offers replacement seal kits for all cartridge models. These kits include all of the external seals on the cartridge along with installation instructions. Seal kits are available in Buna-N and Viton for all models, along with EPDM and polyurethane for many models. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
- The shelf life for this cartridge seal kit is ten years from date of purchase. This date will be printed on the kit packaging.
Cartridge Installation Data [ + ]
Series | P |
Cartridge Thread | M16M16 |
Valve Hex Size | 7/8 in.22,2 mm |
Valve Installation Torque | 20 - 25 lbf ft27 - 33 Nm |
Cavity | T-9A |
Used With [ + ]
What models can this kit be used with?
- DBAM 3-way, manually operated, spool directional valve - pilot capacity
Notes [ + ]
- Install back-up rings and O-rings as shown in views.
- When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
- After installing the GLYD® Ring, size it to restore original shape and to prevent damage during cartridge installation.
- When installing cartridge - be sure to torque to recommended value.
- GLYD® Ring is a registered trademark of W. S. Shamban and Co., Los Angeles, CA, USA
Additional Resources [ + ]
Technical Information