Series 3 - T-33A cavity, Polyurethane cartridge seal kit
![990033002 : Series 3 - T-33A cavity, Polyurethane cartridge seal kit](https://cmsimages.sunhydraulics.com/sk_t33a.gif)
Technical Features [ + ]
Sun offers replacement seal kits for all cartridge models. These kits include all of the external seals on the cartridge along with installation instructions. Seal kits are available in Buna-N and Viton for all models, along with EPDM and polyurethane for many models. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
- The shelf life for this cartridge seal kit is ten years from date of purchase. This date will be printed on the kit packaging.
- Polyurethane seals have a higher tensile strength, are more abrasion/extrusion resistant, and are well suited for high cycle and high pressure applications.
Cartridge Installation Data [ + ]
Series | 3 |
Cartridge Thread | M36M36 |
Valve Hex Size | 1 1/4 in.31,8 mm |
Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
Cavity | T-33A |
Used With [ + ]
What models can this kit be used with?
- DSFD Low side, 3-position, hot oil shuttle valve with delayed shift
- DSGH Low side, 3-position, hot oil shuttle valve
- DSGO Spring offset, 2-position, high side shuttle valve
- DSGS High side, 3-position, shuttle valve
- DSGX 3-way, 2-position, vent-to-shift diverter valve, normally closed
- DSGY 3-way, 2-position, vent-to-shift diverter valve, normally open
- FSEA Closed center, flow divider-combiner valve
- FSEC High accuracy flow divider valve
- FSED Flow divider valve
- FSEG High accuracy, closed center, flow divider-combiner valve
- FSEH High capacity, closed center, flow divider-combiner valve
- FSER High accuracy synchronizing, flow divider-combiner valve
- FSES Synchronizing, flow divider-combiner valve
- LHHA Bypass/restrictive, priority modulating element
- LHHT Normally open, bi-directional, modulating element
- XTCA All ports blocked cavity plug
Notes [ + ]
- Install back-up rings and O-rings as shown in views.
- When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
- When installing cartridge - be sure to torque to recommended value.
Additional Resources [ + ]
Technical Information