Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

780 Series, 24 VDC coil with Deutsch DT04-2P connector and TVS Diode - common cavity

Expand All

Technical Features [ + ]

Power cable with mating connector is required and is not included with product.
Constructed of overmolded plastic with clear trivalent, zinc plated flux cage.
IP rating for this coil is IP69K.
The coil is magnetically symmetrical and can be mounted in either direction on the solenoid tube without affecting performance.
The Deutsch DT04-2P connector satisfies the requirements of thermal shock tests. In this test, the coil is energized to achieve its stabilized temperature and then immediately immersed into ice cold water. This process is repeated 5 times, after which, the insulation resistance of the coils should not fall below 10 megohms.

Technical Data [ + ]

Maximum Coil Temperature at 68ºF (20ºC) Ambient	221ºF (105ºC)221ºF (105ºC)
Arc Suppression (TVS)	IncludedIncluded
Power Consumption (cold) - at rated voltage	22 watts22 watts
Maximum Ambient Temperature	122 °F50 °C
Voltage/Frequency	24 VDC24 VDC
Operating Voltage Range	+/- 10% nominal+/- 10% nominal
Duty Cycle Rating	100 %100 %
Connector	Deutsch DT04-2PDeutsch DT04-2P
Solenoid Tube Diameter	.50 in.12,7 mm
Coil Nut Torque	44 lbf in.44 lbf in.
Model Weight	.75 lb.75 lb

Used With [ + ]

What models can this kit be used with?

DLUT 2-way, direct-acting, balanced spool, solenoid-operated directional valve, 3000 psi (210 bar) - common cavity
DMUQ 3-way, direct-acting, balanced spool, solenoid-operated directional valve, 1600 psi (110 bar) - common cavity
DMUT 3-way, direct-acting, balanced spool, solenoid-operated directional valve, 3000 psi (210 bar) - common cavity
DNUT 4-way, direct-acting, balanced piston solenoid-operated directional valve, 3000 psi (210 bar) - common cavity

Additional Resources [ + ]

Highlights

Sun's New FLeX Series Solenoid Valves & Coils

Technical Information

Sun's Floating Style Screw-In Cartridge (1.06 MB)
Environmental Test Specification for Electrical and Electronic Co (254.61 KB)
CE Declaration of Conformity - XMD 12-2017 (133.69 KB)

780924D | Accessories » Coils | Sun Hydraulics

Assembly Build Process

Assembly Build Process

780 Series, 24 VDC coil with Deutsch DT04-2P connector and TVS Diode - common cavity

Footer