740 Series, 28 VDC, high-power coil with ISO/DIN 43650, Form A connector without TVS Diode (XMD-02 driver included)
![740228X02 : 740 Series, 28 VDC, high-power coil with ISO/DIN 43650, Form A connector without TVS Diode (XMD-02 driver included)](https://cmsimages.sunhydraulics.com/740-2_X.png)
Technical Features [ + ]
- Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
- Power cable with mating connector is required and is not included with the coil.
- The coil is magnetically symmetrical and can be mounted on the solenoid tube in either direction for best cable access without affecting performance.
- Coil is fully RoHS compliant. Restricted materials less than 0.1% total by weight.
- The external steel shell is zinc-nickel plated and provides 1000-hour salt fog protection.
- For optimum proportional performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
- IP rating for this coil is IP65/IP67.
- This coil does not include a transient voltage suppression (TVS) diode and should only be used when surge suppression is included elsewhere in the electrical system. If no surge suppression is included in the circuit, the coil version with TVS diode should be used.
- This coil assembly includes the XMD-02 electro-proportional driver.
Technical Data [ + ]
Operating Temperature Range | -40 to 230 °F-40 to 110 °C |
Arc Suppression (TVS) | NoneNone |
Power Consumption (cold) - at rated voltage | 25 Watts25 Watts |
Maximum Ambient Temperature | 122 °F50 °C |
Voltage/Frequency | 28 VDC28 VDC |
Operating Voltage Range | +10%/-15%+10%/-15% |
Duty Cycle Rating | 100 %100 % |
Connector | ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pinISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin |
Solenoid Tube Diameter | .62 in.15,7 mm |
Coil Nut Torque | 4.5 lbf in.0,5 Nm |
Model Weight | 15.6 oz.15.6 oz. |
Proportional Performance Data [ + ]
Resistance at 20º C | 31.4 ohms ±10%31.4 ohms ±10% |
FAQs [ + ]
740 Series coils meet Sun specification S-367. This specification is on our website under Technical Resources and is also listed in the Additional Resources tab on applicable product pages. Please see sections 11 and 12 of Environmental Test Specification for Electrical and Electronic Components; S-367.
Used With [ + ]
What models can this kit be used with?
- FPBF FLeX Series pilot-operated, normally closed, electro-proportional throttle - flow 2-1
- FPBG FLeX Series pilot-operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1
- FPBI FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1
- FPBJ FLeX Series pilot-operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1
- FPBU FLeX Series electro-proportional, blocking poppet throttle - normally closed
Additional Resources [ + ]
Highlights
- Sun's New FLeX Series Solenoid Valves & Coils
- Our FLeX family of solenoid-operated valves is expanding
Technical Information
- 740 Series Coils - Derating Tables (56.42 KB)
- Environmental Test Specification for Electrical and Electronic Co (254.61 KB)
- Sun's Floating Style Screw-In Cartridge (1.06 MB)
- CE Declaration of Conformity - XMD 12-2017 (133.69 KB)
- XMD Coil Clip Installation Guide (749.23 KB)