Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Élément de régulation, normalement fermé, avec fonction limiteur

Capacité: 40 gpm160 L/min. | Cavité: T-17A

Développer

Caractéristiques techniques [ + ]

Caractéristiques [ + ]

FAQs [ + ]

Accessoires [ + ]

Ressources Complémentaires [ + ]

RVGBLAN

view all

Configuration Rules

Cavité	T-17A
Taille	3
Capacité	40 gpm160 L/min.
Pression maximale de fonctionnement	5000 psi350 bar
Tarage en usine établi à	4 gpm15 L/min.
Fuite Maximale à 24 cSt (100 SUS)	4 in³/min.@1000 psi65 cc/min.@70 bar
Temps de Réponse - Typique	10 ms10 ms
Adjustment - No. of CW Turns from Min. to Max. setting	55
Dimensions du six pans de la valve	1"1/4 in.31,8 mm
Couple de serrage de la valve	150 à 160 lbf ft203 - 217 Nm
Taille du 6 Pans Creux de la Vis de Réglage	5/32 in.4 mm
Dimension du contre-écrou sur plat	9/16" in.15 mm
Couple de serrage du contre écrou	80 - 90 lbf in.9 - 10 Nm
Poids du composant	1,60 lb0,70 kg
Seal kit - Cartridge	Buna: 990017007
Seal kit - Cartridge	Polyurethane: 990017002
Seal kit - Cartridge	Viton: 990017006

RVGB | Cartouches » CavitySaver™ (multi-function) » Régulation Compensée | Sun Hydraulics

Assembly Build Process

Assembly Build Process

LoadMatch™ ROI Calculator

Élément de régulation, normalement fermé, avec fonction limiteur

Symbols for RVGB

Symbols for RVGB

Footer