Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Fusibles hydrauliques pour manomètre, mâle 1/4" NPTF vers femelle 1/4" NPTF

NQAAXAXAA : Fusibles hydrauliques pour manomètre, mâle 1/4

Développer

Caractéristiques techniques [ + ]

Les fusibles Sun pour prises de pression protègent les systèmes contre les pertes d’huile quand un manomètre ou un capteur sont rompus. Si un choc sur le manomètre ou le fusible hydraulique coupe le fusible au ras de l’orifice, il continue à assurer sa fonction car le mécanisme se trouve à l’intérieur de l’orifice de raccordement.

La valve se ferme quand le débit dépasse 4 l/min (1 gpm ) +/- 20% ou quand la pression différentielle dépasse 7 bar +/- 1,7 bar (100 psi +/- 25 psi).
La valve s’ouvre à nouveau quand la pression différentielle chute en-dessous de 3 +/- 1,3 bar (80 +/- 20 psi).
La flèche montre le sens de fermeture de la valve.

Retour Vers le Haut

Caractéristiques [ + ]

Pression maximale de fonctionnement	5000 psi350 bar
Matière des Joints	AucunAucun
Configuration de l'Orifice	1/4" NPTF (mâle) - 1/4" NPTF (femelle)1/4" NPTF (mâle) - 1/4" NPTF (femelle)
Matière	Acier galvaniséAcier galvanisé

Retour Vers le Haut

FAQs [ + ]

Your gage line fuse is just what I want, but I need a setting of 2 gpm (7,5 L/min.).

Sorry, the design of the NQAA does not lend itself to other settings. Its claim to fame is that when the gage is broken off the manifold, the working parts of the fuse stay in the port and prevent excess loss of oil. It is a gage line fuse, nothing more.

Retour Vers le Haut

Ressources Complémentaires [ + ]

Informations et Conseils Techniques Pour les Differentes Fonctions Hydrauliques SUN

Fonctions Spécifiques (462.31 Ko)

Technical Information

Retour Vers le Haut

NQAAXAXAA | Accessoires » Robinets d'Isolement, Adaptateurs et Fusibles | Sun Hydraulics

Assembly Build Process

Assembly Build Process

Fusibles hydrauliques pour manomètre, mâle 1/4" NPTF vers femelle 1/4" NPTF

Footer