Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Étrangleur réglable

Capacité: 12 gpm (.25 inch)45 L/min. (6,4 mm) | Cavité: T-5A

Développer

Caractéristiques techniques [ + ]

Caractéristiques [ + ]

Performance Curves [ + ]

FAQs [ + ]

Notes [ + ]

Ressources Complémentaires [ + ]

NFDCLAN

Configuration Rules

Cavité	T-5A
Taille	2
Capacité	12 gpm (.25 inch)45 L/min. (6,4 mm)
Pression maximale de fonctionnement	5000 psi350 bar
Adjustment - No. of CCW Turns from Fully Closed to Fully Open	55
Dimensions du six pans de la valve	1"1/8 in.28,6 mm
Couple de serrage de la valve	45-50 lbf ft61 - 68 Nm
Taille du 6 Pans Creux de la Vis de Réglage	5/32 in.4 mm
Dimension du contre-écrou sur plat	9/16" in.15 mm
Couple de serrage du contre écrou	80 - 90 lbf in.9 - 10 Nm
Poids du composant	0,60 lb0,30 kg
Seal kit - Cartridge	Buna: 990203007
Seal kit - Cartridge	EPDM: 990203014
Seal kit - Cartridge	Viton: 990203006

NFDC | Cartouches » Flow Control » Étrangleur Fin | Sun Hydraulics

Assembly Build Process

Assembly Build Process

LoadMatch™ ROI Calculator

Étrangleur réglable

Footer