Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Elément de régulation, normalement ouvert, avec source du pilotage à l'orifice 1

Capacité: 7,5 gpm30 L/min. | Cavité: T-163A

Développer

Caractéristiques techniques [ + ]

Caractéristiques [ + ]

FAQs [ + ]

Ressources Complémentaires [ + ]

Included Components[ + ]

Modèle

version par défaut

LPBAXHN

view all

Configuration Rules

OÙ ACHETER

Assembly Build Process

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

Build an Assembly

Find Compatible Manifolds

Lorsque l’option de contrôle est L, la plage de réglage doit être D
Lorsque l’option de contrôle est X, la plage de réglage doit être D,F ou H

Cavité	T-163A
Taille	0
Capacité	7,5 gpm30 L/min.
Pression maximale de fonctionnement	5000 psi350 bar
Diamètre des Gicleurs	0,016 in.0,4 mm
Dimensions du six pans de la valve	3/4 in.19,1 mm
Couple de serrage de la valve	20 à 25 lbf ft27 - 33 Nm
Seal kit - Cartridge	Buna: 990163007
Seal kit - Cartridge	Polyurethane: 990163002
Seal kit - Cartridge	Viton: 990163006
Poids du composant	0.20 lb.0.09 kg.

Part	Description	Quantity
CXEDXCN	Cartridge	1
PBFBLAN	Cartridge - Primary	1

LPBA | Cartouches » Flow Control » Élément de Régulation | Sun Hydraulics

Assembly Build Process

Assembly Build Process

LoadMatch™ ROI Calculator

Elément de régulation, normalement ouvert, avec source du pilotage à l'orifice 1

Symbols for LPBA

Symbols for LPBA

Assembly Build Process

Footer