Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Sélecteur à tiroir, 3 positions, côté haute pression

Capacité: 120 gpm480 L/min. | Cavité: T-34A

Développer

Caractéristiques techniques [ + ]

Les sélecteurs avec pilotage par la haute pression sont le plus souvent utilisés dans les circuits différentiels permanents. Quand les deux lignes du circuit (chambres 2 et 4) sont à la même pression, la valve est centrée par des ressorts dans une position où tous les orifices sont bloqués. Quand l’une des lignes (chambre 2 ou 4) voit une pression plus élevée, elle est connectée à l’orifice commun (chambre 3).

Cette valve permet de contrôler l’emballement d’une charge mue par une avance différentielle, lorsque la charge tend à tirer la tige. Elle n’empêche pas la dérive due aux fuites du tiroir.
Le tiroir et la chemises en acier traité ont d’excellentes caractéristiques contre l’usure et réduisent les fuites internes.
Bien que cette valve aille dans une cavité à 4 orifices, le nez de la cartouche (orifice 1) n’est pas utilisé.
Cette valve intègre le concept Sun de la cartouche à visser "flottante" qui permet de minimiser les contraintes internes dues à un couple de serrage excessif de la cartouche et/ou à des écarts d’usinage des cavités ou des cartouches.

Retour Vers le Haut

Caractéristiques [ + ]

Remarque: Les caractéristiques peuvent changer selon la configuration. Voir la section CONFIGURATION.

Cavité	T-34A
Taille	4
Capacité	120 gpm480 L/min.
Pression maximale de fonctionnement	5000 psi350 bar
Fuite Maximale à 24 cSt (100 SUS)	5 in³/min.@1000 psi80 cc/min.@70 bar
Dimensions du six pans de la valve	1"5/8 in.41,3 mm
Couple de serrage de la valve	350 - 375 lbf ft474 - 508 Nm
Poids du composant	2,90 lb1,30 kg
Seal kit - Cartridge	Buna: 990034007
Seal kit - Cartridge	Polyurethane: 990034002
Seal kit - Cartridge	Viton: 990034006

Retour Vers le Haut

Performance Curves [ + ]

Performance Curve for DSIS: Sélecteur à tiroir, 3 positions, côté haute pression

Retour Vers le Haut

FAQs [ + ]

Quel est le volume d'une goutte d'huile hydraulique ?

Il y a exactement 15 gouttes Sun dans un centimètre cube.

Direct acting, pilot operated, what do I use?

Direct acting valves are used to prevent over pressure and pilot operated valves are used to regulate pressure. If you are unsure, use a direct acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.

What parts of the Sun cartridge valve are field serviceable?

Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.

Retour Vers le Haut

Ressources Complémentaires [ + ]

A la Une de Sun

Informations et Conseils Techniques Pour les Differentes Fonctions Hydrauliques SUN