Distributeur à tiroir, 4 voies / 2 positions, commutation par pilotage

Capacité: 25 à 100 gpm95 - 380 L/min. | Cavité: T-63A

Développer

Caractéristiques techniques [ + ]

Caractéristiques [ + ]

Performance Curves [ + ]

FAQs [ + ]

Ressources Complémentaires [ + ]

Included Components[ + ]

Modèle

version par défaut

DCEFXXN

X-Control, X-Spool

view all

Configuration Rules

OÙ ACHETER

Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

创建装配体

查找匹配的阀块

When the seal is E, l’option de contrôle doit être X

Cavité	T-63A
Taille	3
Capacité	25 à 100 gpm95 - 380 L/min.
Pression de pilotage minimale pour commuter la valve	125 psi9 bar
Fuite Maximale à 24 cSt (100 SUS)	2 in³/min.@1000 psi30 cc/min.@70 bar
Volume nécessaire au pilotage	0,17 in³2,8 cc
Dimensions du six pans de la valve	1"1/4 in.31,8 mm
Couple de serrage de la valve	150 à 160 lbf ft203 - 217 Nm
Seal kit - Cartridge	Buna: 990063007
Seal kit - Cartridge	EPDM: 990063014
Seal kit - Cartridge	Polyurethane: 990063002
Seal kit - Cartridge	Viton: 990063006

Part	Beschreibung	Anzahl
340-002*	Pipe Plug	1
CXEDXCN	Cartridge	1
RSFCLAN	Cartridge - Primary	1

DCEF | Cartouches » Directional » 4 voies | Sun Hydraulics

Assembly Build Process

Assembly Build Process

LoadMatch™ ROI Calculator

Distributeur à tiroir, 4 voies / 2 positions, commutation par pilotage

Symbols for DCEF

Symbols for DCEF

Assembly Build Process

Footer