Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Distributeur 4 voies / 2 positions indexées, commutation par pilotage,

Capacité: 40 à 60 gpm160 - 240 L/min. | Cavité: T-63A

Développer

Caractéristiques techniques [ + ]

Caractéristiques [ + ]

Performance Curves [ + ]

FAQs [ + ]

Ressources Complémentaires [ + ]

DCEDXCN

X-Control, C-Spool

view all

Configuration Rules

Cavité	T-63A
Taille	3
Capacité	40 à 60 gpm160 - 240 L/min.
Pression maximale de fonctionnement	5000 psi350 bar
Pression de pilotage minimale pour commuter la valve	125 psi9 bar
Fuite Maximale à 24 cSt (100 SUS)	2 in³/min.@1000 psi30 cc/min.@70 bar
Volume nécessaire au pilotage	0,34 in³5,6 cc
Dimensions du six pans de la valve	1"1/4 in.31,8 mm
Couple de serrage de la valve	150 à 160 lbf ft203 - 217 Nm
Poids du composant	1,80 lb0,80 kg
Seal kit - Cartridge	Buna: 990063007
Seal kit - Cartridge	Polyurethane: 990063002
Seal kit - Cartridge	Viton: 990063006

DCED | Cartouches » Directional » 4 voies | Sun Hydraulics

Assembly Build Process

Assembly Build Process

LoadMatch™ ROI Calculator

Distributeur 4 voies / 2 positions indexées, commutation par pilotage,

Symbols for DCED

Symbols for DCED

Footer