Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Clapet anti-retour, passage libre de 1 vers 2, avec gicleur en parallèle

Capacité: 15 gpm60 L/min. | Cavité: T-13A

Développer

Caractéristiques techniques [ + ]

Les clapets anti-retour avec gicleur en parallèle laissent passer librement le débit de l'orifice 1 vers l'orifice 2 et le contrôlent par un gicleur calibré selon les besoins du client de 2 vers 1. Voir les informations techniques ci-dessous pour la gamme de gicleurs.

Tous les clapets anti-retour à 2 orifices d’une même taille utilisent la même cavité. Cependant, il faut faire attention car le sens de débit peut être inversé.
Ils acceptent 350 bar aux orifices 1 et 2.
Les clapets avec gicleur de by-pass (passage libre de 2 vers 1) sont considérés comme des valves de contrôle de débit et sont référencés comme valves de contrôle de débit non compensés en pression à orifice fixe avec clapet de by-pass.
Le diamètre de l’orifice déterminé par le client est gravé sur le six pans de la cartouche.
Les cartouches résistant à la corrosion sont destinées à une utilisation dans des environnements corrosifs et sont identifiées par l'extension /AP ou LH (voir la section CONFIGURATION). Pour plus de détails consulter la page "Matières utilisées dans nos produits".
Cette valve intègre le concept Sun de la cartouche à visser "flottante" qui permet de minimiser les contraintes internes dues à un couple de serrage excessif de la cartouche et/ou à des écarts d’usinage des cavités ou des cartouches.

Retour Vers le Haut

Caractéristiques [ + ]

Remarque: Les caractéristiques peuvent changer selon la configuration. Voir la section CONFIGURATION.

Cavité	T-13A
Taille	1
Capacité	15 gpm60 L/min.
Pression maximale de fonctionnement	5000 psi350 bar
Gamme de Gicleurs	0,016 à 0,107 in.0,4 - 2,7 mm
Dimensions du six pans de la valve	7/8 in.22,2 mm
Couple de serrage de la valve	30 à 35 lbf ft41 - 47 Nm
Seal kit - Cartridge	Buna: 990010007
Seal kit - Cartridge	Polyurethane: 990010002
Seal kit - Cartridge	Viton: 990010006

Retour Vers le Haut

Performance Curves [ + ]

Performance Curve for CNDC: Clapet anti-retour, passage libre de 1 vers 2, avec gicleur en parallèle

Retour Vers le Haut

FAQs [ + ]

Quel est le volume d'une goutte d'huile hydraulique ?

Il y a exactement 15 gouttes Sun dans un centimètre cube.

Direct acting, pilot operated, what do I use?

Direct acting valves are used to prevent over pressure and pilot operated valves are used to regulate pressure. If you are unsure, use a direct acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.

I need to discharge a large accumulator. How can I increase the capacity of my discharge circuit?

Because of the very high ratio, the COFO has limited capacity. The discharge path is across a .050 inch (1,3 mm) diameter orifice. If you have large accumulators combined with low precharge pressures, this may not discharge the energy quickly enough. Using the COFO XDN cartridge in conjunction with an LODA XDN will provide capacity for larger applications.

What parts of the Sun cartridge valve are field serviceable?

Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.

Retour Vers le Haut

Ressources Complémentaires [ + ]

A la Une de Sun