Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Cetop 05 studnut and studrod kit - M6 thread

Développer

Caractéristiques techniques [ + ]

Pour simplifier l'installation des blocs modulaires Cetop 03 et Cetop 05, Sun propose des kits de goujons prédécoupés ou non coupés (pouvant être coupés à longueur sur place) avec filetage métrique ou en pouces. Lorsque les tirants sont installés dans une embase ou un bloc foré, ils servent de guide pour l'empilage des blocs modulaires. Après l'installation du distributeur sur le dessus de l'empilage, les écrous spéciaux d'assemblage Sun sont utilisés pour maintenir l'ensemble.

Le diamètre extérieur des écrous spéciaux d’assemblage est égal au diamètre du lamage pour les têtes de vis standard.
Toute la longueur taraudée peut être engagée.
Une butée mécanique entre la tête à six pans creux et le taraudage empêche la douille de sortir de son logement.

Retour Vers le Haut

Caractéristiques [ + ]

Couple de Serrage Recommandé	108 lbf in.12 Nm
Taille du six pans creux	3/16"3/16"
taraudage	M6 M6
Longueur de tirant	36 in.914 mm
Résistance à la Traction Minimale	125 000 psi8620 bar
Limite Elastique Minimale	105 000 psi105 000 psi
dureté	28 à 32 Rc28 à 32 Rc

Retour Vers le Haut

Related Information [ + ]

Retour Vers le Haut

Ressources Complémentaires [ + ]

Informations et Conseils Techniques Pour les Differentes Fonctions Hydrauliques SUN

Blocs Modulaires (575.9 Ko)

Technical Information

Retour Vers le Haut

992103 | Accessoires » Écrous de Serrage et Tirants | Sun Hydraulics

Assembly Build Process

Assembly Build Process

Cetop 05 studnut and studrod kit - M6 thread

Footer