Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

XMD Series, 3M, 12-pin Deutsch prototype câble, single-output avec ISO/DIN 43650, Forme A lead

Développer

Caractéristiques techniques [ + ]

This single-output, 12 Pin Deutsch cable assembly is for use with Sun's XMD-01 electro-hydraulic driver. It comes equipped with a ISO/DIN 43650, Form A overmolded connector that connects directly to the FLeX or 770 Series VDC ISO/DIN 43650 coils when combined with the coil clip accessory.

Workmanship performed to IPC-A-620 Class 2
Stranded Black UL 3289CSA 18 Gauge Wire
Rated for 150°C (302°F)
Insulation type XLPE
Rated for 750 VDC and 600 VAC
DIN connector rated to IP 67 and NEMA 6, dust tight and water resistant
DIN connector rated to 300 VDC and 250 VAC 50/60 Hz
DIN connector rated from -25°C to +80°C (-13°F to +176°F)

Retour Vers le Haut

Caractéristiques [ + ]

Length	3 m3 m
Connecteur	Molex 93445-6212, Keying Option A, GreyMolex 93445-6212, Keying Option A, Grey
Lead Connector	Canfield 5J664000US0A or 5J664000EUOA, ISO DIN 43650, BlackCanfield 5J664000US0A or 5J664000EUOA, ISO DIN 43650, Black
Lead Length	0,3 m0,3 m

Retour Vers le Haut

Used With [ + ]

What models can this kit be used with?

740212 740 Series, 12 VCC, high-power bobine avec ISO/DIN 43650, Forme A Connecteur without TVS Diode
740212D 740 Series, 12 VCC, high-power bobine avec ISO/DIN 43650, Forme A Connecteur avec TVS Diode
740212L 740 Series, 12 VCC, low-power bobine avec ISO/DIN 43650, Forme A Connecteur without TVS Diode
740212LD 740 Series, 12 VCC, low-power bobine avec ISO/DIN 43650, Forme A Connecteur avec TVS Diode
740214 740 Series, 14 V CC, high-power bobine avec ISO/DIN 43650, Forme A Connecteur without TVS Diode
740214D 740 Series, 14 V CC, high-power bobine avec ISO/DIN 43650, Forme A Connecteur avec TVS Diode
740214L 740 Series, 14 V CC, low-power bobine avec ISO/DIN 43650, Forme A Connecteur without TVS Diode
740214LD 740 Series, 14 V CC, low-power bobine avec ISO/DIN 43650, Forme A Connecteur avec TVS Diode
740224 740 Series, 24 VCC high-power bobine avec ISO/DIN 43650, Forme A Connecteur without TVS Diode
740224D 740 Series, 24 VCC high-power bobine avec ISO/DIN 43650, Forme A Connecteur avec TVS Diode
740224L 740 Series, 24 VCC, low-power bobine avec ISO/DIN 43650, Forme A Connecteur without TVS Diode
740224LD 740 Series, 24 VCC, low-power bobine avec ISO/DIN 43650, Forme A Connecteur avec TVS Diode
740228 740 Series, 28 VCC, high-power bobine avec ISO/DIN 43650, Forme A Connecteur without TVS Diode
740228D 740 Series, 28 VCC, high-power bobine avec ISO/DIN 43650, Forme A Connecteur avec TVS Diode
740228L 740 Series, 28 VCC, low-power bobine avec ISO/DIN 43650, Forme A Connecteur without TVS Diode
740228LD 740 Series, 28 VCC, low-power bobine avec ISO/DIN 43650, Forme A Connecteur avec TVS Diode
770212 12 VCC bobine avec ISO/DIN 43650, Forme A Connecteur avec TVS Diode
770214 14 V CC bobine avec ISO/DIN 43650, Forme A Connecteur avec TVS Diode
770224 24 VCC bobine avec ISO/DIN 43650, Forme A Connecteur avec TVS Diode
770228 28 VCC bobine avec ISO/DIN 43650, Forme A Connecteur avec TVS Diode