Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

740 Series, red detent/lock operation, Commande Manuelle Kit pour dispositif de réglage , Dispositif de Réglage L

Développer

Caractéristiques techniques [ + ]

The Twist/Lock manual override is a rotary, hand-actuated device for use on Sun's full flow solenoid valves and FLeX series valves. The hand knob is constructed of a reinforced red plastic for durability, heat resistance and stability in varying environmental conditions and is suitable for operation with a gloved hand. The override assembly incorporates a sealed-construction design thereby preventing the introduction of debris and other damaging contamination. Once installed on a Sun solenoid valve, the override feature allows the operator to manually shift the de-energized valve. The red L control is available in kit form only and cannot be configured with the cartridge. Please note that valves with the Twist/Lock manual override are not suitable for load holding applications.

L'option de commande manuelle rotative à indexage "L" permet à l'opérateur d'actionner la valve jusqu'à une position indexée mécaniquement, en tournant la molette dans le sens anti-horaire. Cette position indexée est maintenue jusqu'à ce que l'opérateur tourne la molette dans le sens horaire, permettant à la valve de retourner dans la position désexcitée. Veuillez noter que la position indexée ne convient pas pour les applications de maintien de charges.
La commande manuelle de secours a une espérance de vie mécanique de 7000 cycles environ.
For proper operation of the twist-type manual overrides, it is important to grasp the cap fully before turning.

Retour Vers le Haut

Caractéristiques [ + ]

Matière	Red plastic and aluminumRed plastic and aluminum
Couple nécessaire	15 lbf in.15 lbf in.
Description	Commande Rotative Indexée (Option L)Commande Rotative Indexée (Option L)

Retour Vers le Haut

Used With [ + ]

What models can this kit be used with?

DBAF 3 Voies électro distributeur à tiroir Valve - capacité de pilotage (740 Series)
DFBD FLeX Series 2 Voies, 2-stage, électro distributeur Clapet Valve avec Clapet de By-Pass - flow 2-1, 3000 psi (210 bar)
DFBE FLeX Series 2 Voies, 2-stage, électro distributeur Clapet Valve avec Clapet de By-Pass - flow 2-1, 3000 psi (210 bar)
DFBF FLeX Series 2 Voies, 2-stage, électro distributeur Clapet Valve avec Clapet de By-Pass - flow 2-1
DFBG FLeX Series 2 Voies, 2-stage, électro distributeur Clapet Valve avec Clapet de By-Pass - flow 2-1
DLDF 2 Voies, électro distributeur à tiroir Valve (740 Series)
DTAF FLeX Series 2 Voies, à action directe, électro distributeur blocking Clapet Valve
DTBF FLeX Series 2 Voies, à action directe, électro distributeur blocking Clapet Valve
DWBF FLeX Series 3 Voies, à action directe, électro distributeur blocking Clapet Valve
DWDF 3 Voies, à action directe, électro distributeur Clapet Valve (740 Series)

Retour Vers le Haut

Notes [ + ]

S'assurer de la présence du joint torique à la base du dispositif de commande manuelle.
Retirer l'écrou de serrage de la bobine existant du doigt de gant du solénoide.
Visser le dispositif de commande manuel sur l'extrémité du doigt de gant du solénoide. Orienter le connecteur de la bobine dans la direction désirée avant de serrer le dispositif de commande manuel à la main.
Note : Il est possible d'utiliser du "frein filet" si les conditions d'utilisation le nécessitent.

Retour Vers le Haut

Ressources Complémentaires [ + ]

A la Une de Sun

Limiteur de Valeur Maximum de Réglage

Technical Information

Retour Vers le Haut

991302 | Accessoires » Cartouche Options de Contrôle | Sun Hydraulics

Assembly Build Process

Assembly Build Process

740 Series, red detent/lock operation, Commande Manuelle Kit pour dispositif de réglage , Dispositif de Réglage L

Footer